Computer Troubleshooting And Repair

[blu3devil]

tanung ku lang mga sir dati ok ung router ko as in nakakapag internet lahat ng mga naka konek saken

bakit pu kaya ngayon di sila maka konek?

 

I'm assuming you have a broadband DSL, can you check if your phone is OK? This could be a problem with the service provider, try to connect your PC straight to your modem (bypassing the router), does it work OK? If yes then it is just a problem with your router possibly misconfiguration or a cable not connected properly, if it also doesnt work then this confirm that there is a problem with your ISP. Call your ISP to check on your internet service.

[Astro01]

Bro,

 

tanong ko lang po pano madelete ung file n ganito kc nag flag (CANNOT DELETE: XXXXXX: Access denied. Make sure the disk is not full or write-protected and that the file is not currently in use. 320 gig naman ung HD ko.

[creeplike]

Hmmm tnx guys but i dnt think the prob is with overheating. K namn ventilation ko and 2 fan ng pc ko. Bgla lng tlga mamatay kht nanunuod ako ng dvd, surf ng inet, prang napindot mo yng reset gnun yng nangyayari. Il try muna yng sinasbi nyo sa mem, pg hndi naku patay

[circle5807]

good day po.. ask lang ako

 

how to repair a cpu with buzzing sound.

old cpu na sya, ayaw umandar, long buzz sound lang.

ano pong error nun at paano i-repair.

 

thanks po

[jcsantos]

good day po.. ask lang ako

 

how to repair a cpu with buzzing sound.

old cpu na sya, ayaw umandar, long buzz sound lang.

ano pong error nun at paano i-repair.

 

thanks po

 

inde mo na maayos pag long beep

[jcsantos]

reviving old post

 

Beep Codes Error Codes

Some useful information .

 

Standard Original IBM POST Error Codes

Code Description

 

1 short beep System is OK

2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem

1 long, 1 short beep System board problem

1 long, 2 short beeps Display adapter problem (MDA, CGA)

1 long, 3 short beeps Display adapter problem (EGA)

3 long beeps 3270 keyboard card

IBM POST Diagnostic Code Descriptions

Code Description

100 - 199 System Board

200 - 299 Memory

300 - 399 Keyboard

400 - 499 Monochrome Display

500 - 599 Colour/Graphics Display

600 - 699 Floppy-disk drive and/or Adapter

700 - 799 Math Coprocessor

900 - 999 Parallel Printer Port

1000 - 1099 Alternate Printer Adapter

1100 - 1299 Asynchronous Communication Device, Adapter, or Port

1300 - 1399 Game Port

1400 - 1499 Colour/Graphics Printer

1500 - 1599 Synchronous Communication Device, Adapter, or Port

1700 - 1799 Hard Drive and/or Adapter

1800 - 1899 Expansion Unit (XT)

2000 - 2199 Bisynchronous Communication Adapter

2400 - 2599 EGA system-board Video (MCA)

3000 - 3199 LAN Adapter

4800 - 4999 Internal Modem

7000 - 7099 Phoenix BIOS Chips

7300 - 7399 3.5" Disk Drive

8900 - 8999 MIDI Adapter

11200 - 11299 SCSI Adapter

21000 - 21099 SCSI Fixed Disk and Controller

21500 - 21599 SCSI CD-ROM System

 

AMI BIOS Beep Codes

Code Description

 

1 Short Beep System OK

2 Short Beeps Parity error in the first 64 KB of memory

3 Short Beeps Memory failure in the first 64 KB

4 Short Beeps Memory failure in the first 64 KB Operational of memory

or Timer 1 on the motherboard is not functioning

5 Short Beeps The CPU on the motherboard generated an error

6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode

7 Short Beeps The CPU generated an exception interrupt

8 Short Beeps The system video adapter is either missing, or its memory is faulty

9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS

10 Short Beeps The shutdown register for CMOS RAM failed

11 Short Beeps The external cache is faulty

1 Long, 3 Short Beeps Memory Problems

1 Long, 8 Short Beeps Video Card Problems

 

Phoenix BIOS Beep Codes

Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

 

Code Description

1-1-3 CMOS read/write failure

1-1-4 ROM BIOS checksum error

1-2-1 Programmable interval timer failure

1-2-2 DMA initialisation failure

1-2-3 DMA page register read/write failure

1-3-1 RAM refresh verification failure

1-3-3 First 64k RAM chip or data line failure

1-3-4 First 64k RAM odd/even logic failure

1-4-1 Address line failure first 64k RAM

1-4-2 Parity failure first 64k RAM

2-_-_ Faulty Memory

3-1-_ Faulty Motherboard

3-2-4 Keyboard controller Test failure

3-3-4 Screen initialisation failure

3-4-1 Screen retrace test failure

3-4-2 Search for video ROM in progress

4-2-1 Timer tick interrupt in progress or failure

4-2-2 Shutdown test in progress or failure

4-2-3 Gate A20 failure

4-2-4 Unexpected interrupt in protected mode

4-3-1 RAM test in progress or failure>ffffh

4-3-2 Faulty Motherboard

4-3-3 Interval timer channel 2 test or failure

4-3-4 Time of Day clock test failure

4-4-1 Serial port test or failure

4-4-2 Parallel port test or failure

4-4-3 Math coprocessor test or failure

Low 1-1-2 System Board select failure

Low 1-1-3 Extended CMOS RAM failure

[jcsantos]

I am trying to make a clean install of win7. I was able to install it thrice (3X) on two three HD's. One I am using in the office and two on my home PC (one is a back-up). Something went haywire with the one at home. Now I can no longer make a clean install using the same DVD. Funny thing is using XP or Vista Installer, works fine but not with the win7 DVD. Tried it also on my PC at work, same thing won't boot from the DVD. Any explanation . . . help PLEASE.

 

baka marumi lagn dvd mo

 

try cleaning it with a clean cloth or tissue paper , you can put a small amount of baby oil ( don't use alcohol )

[Saeki®]

baka marumi lagn dvd mo

 

try cleaning it with a clean cloth or tissue paper , you can put a small amount of baby oil ( don't use alcohol )

 

 

another suggestion:

 

if the cd is working on another computer its possible na i debug mo ang hdd (if your planning to format the hdd anyway)

u could use the xp cd muna to go to the command prompt and start from there. suggestion lang naman

[Saeki®]

Hmmm tnx guys but i dnt think the prob is with overheating. K namn ventilation ko and 2 fan ng pc ko. Bgla lng tlga mamatay kht nanunuod ako ng dvd, surf ng inet, prang napindot mo yng reset gnun yng nangyayari. Il try muna yng sinasbi nyo sa mem, pg hndi naku patay

 

 

computer that keeps on rebooting itself huh? :boo:

 

its possible its a hardware or a software actually....

hardware part.... overheating, memory, blah blah

 

 

software : most likely the computer encounters an error and other than it showing you the BSOD error, it just reboots itself.

you could check this :

 

right click on my computer>properties>advanced (tab) > start up and recovery (settings) > and uncheck automatically shutdown

 

you could try this if hardware is proven to be working as designed.

it would not restart the computer. but it might give you the BSOD which is at least a good thing. you would know what you need to delete or replace

[Astro01]

Bros, Tanong ko lang kc ung pc ko laging nagrerestart. Nkakapasok nman cya sa Windows XP desktop hanggang maload lang nya lahat ng icon mlapit sa orasan tpos RESTART n cya. Ano kayang problema nito? Pano to ayusin? THANKS :thumbsupsmiley: :headsetsmiley:

[Saeki®]

Bros, Tanong ko lang kc ung pc ko laging nagrerestart. Nkakapasok nman cya sa Windows XP desktop hanggang maload lang nya lahat ng icon mlapit sa orasan tpos RESTART n cya. Ano kayang problema nito? Pano to ayusin? THANKS :thumbsupsmiley: :headsetsmiley:

 

 

lsass issue

its possible na may virus si pc (based lang sa experience ko ito ha? baka mali ako)

try going to safe mode (f8). ganun parin ba ang nagyayari? kung hindi, disable all startup items (msconfig)

kung makakapag run ka nang antivirus sa safe mode gawin mo na

[-wet-]

Bros, Tanong ko lang kc ung pc ko laging nagrerestart. Nkakapasok nman cya sa Windows XP desktop hanggang maload lang nya lahat ng icon mlapit sa orasan tpos RESTART n cya. Ano kayang problema nito? Pano to ayusin? THANKS :thumbsupsmiley: :headsetsmiley:

subukan mo ring check psu mo. tsaka ilang memory modules ang ginagamit mo? kung more than one, baka sira ang isa.

 

lsass issue

its possible na may virus si pc (based lang sa experience ko ito ha? baka mali ako)

try going to safe mode (f8). ganun parin ba ang nagyayari? kung hindi, disable all startup items (msconfig)

kung makakapag run ka nang antivirus sa safe mode gawin mo na

hahahaha! antivirus ha.. ehehehehe!

[Astro01]

Bros, tanong lang po. Bakit nagrerestart ung pc pag nagsasaksak ako sa USB? :unsure:

[Arneeious]

I noticed that recently that when I turn on my AVR my pc (sometimes) turns on immediately even before I push the power button. Could this be caused by a virus or hardware problem?

 

Also, I noticed a McAfee Security Scan Plus icon on my desktop (and even in the Start/All Programs list). Only my wife and I use the pc and she doesn't remember downloading/installing the program. I'm worried that if this is a virus and I use the typical Uninstall option, it might actually activate the virus. Any ideas on how to safely remove it? Thank you.

[SamanthaJones]

I noticed that recently that when I turn on my AVR my pc (sometimes) turns on immediately even before I push the power button. Could this be caused by a virus or hardware problem?

 

Also, I noticed a McAfee Security Scan Plus icon on my desktop (and even in the Start/All Programs list). Only my wife and I use the pc and she doesn't remember downloading/installing the program. I'm worried that if this is a virus and I use the typical Uninstall option, it might actually activate the virus. Any ideas on how to safely remove it? Thank you.

 

This is definitely a hardware problem. Either a motherboard or power supply problem or a power button (front i/o panel). Disconnect your avr, reseat the power connectors from the motherboard. plug in the avr then turn it on. Check if your computer still turns on automatically. If it still does the same thing might consider replacing the PSU - check as well the power button or your mobo might be short circuited.

 

Try uninstalling it using REVO uninstaller or Windows Clean UP utility. Try running malwarebytes to check for spyware.

[Arneeious]

This is definitely a hardware problem. Either a motherboard or power supply problem or a power button (front i/o panel). Disconnect your avr, reseat the power connectors from the motherboard. plug in the avr then turn it on. Check if your computer still turns on automatically. If it still does the same thing might consider replacing the PSU - check as well the power button or your mobo might be short circuited.

 

Try uninstalling it using REVO uninstaller or Windows Clean UP utility. Try running malwarebytes to check for spyware.

 

Thank you very much for the advice.

[gagambingi]

Bros, tanong lang po. Bakit nagrerestart ung pc pag nagsasaksak ako sa USB? :unsure:

 

Nagtry kana ba gumamit ng ibang usb stick? If same problem, try the other usb port para ma isolate mo agad, if same pa din, try to install repair option.

[SamanthaJones]

No more issues???? damn i miss this thread

[bogchi90210]

Beep Codes Error Codes

Some useful information .

 

Standard Original IBM POST Error Codes

Code Description

 

1 short beep System is OK

2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem

1 long, 1 short beep System board problem

1 long, 2 short beeps Display adapter problem (MDA, CGA)

1 long, 3 short beeps Display adapter problem (EGA)

3 long beeps 3270 keyboard card

IBM POST Diagnostic Code Descriptions

Code Description

100 - 199 System Board

200 - 299 Memory

300 - 399 Keyboard

400 - 499 Monochrome Display

500 - 599 Colour/Graphics Display

600 - 699 Floppy-disk drive and/or Adapter

700 - 799 Math Coprocessor

900 - 999 Parallel Printer Port

1000 - 1099 Alternate Printer Adapter

1100 - 1299 Asynchronous Communication Device, Adapter, or Port

1300 - 1399 Game Port

1400 - 1499 Colour/Graphics Printer

1500 - 1599 Synchronous Communication Device, Adapter, or Port

1700 - 1799 Hard Drive and/or Adapter

1800 - 1899 Expansion Unit (XT)

2000 - 2199 Bisynchronous Communication Adapter

2400 - 2599 EGA system-board Video (MCA)

3000 - 3199 LAN Adapter

4800 - 4999 Internal Modem

7000 - 7099 Phoenix BIOS Chips

7300 - 7399 3.5" Disk Drive

8900 - 8999 MIDI Adapter

11200 - 11299 SCSI Adapter

21000 - 21099 SCSI Fixed Disk and Controller

21500 - 21599 SCSI CD-ROM System

 

AMI BIOS Beep Codes

Code Description

 

1 Short Beep System OK

2 Short Beeps Parity error in the first 64 KB of memory

3 Short Beeps Memory failure in the first 64 KB

4 Short Beeps Memory failure in the first 64 KB Operational of memory

or Timer 1 on the motherboard is not functioning

5 Short Beeps The CPU on the motherboard generated an error

6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode

7 Short Beeps The CPU generated an exception interrupt

8 Short Beeps The system video adapter is either missing, or its memory is faulty

9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS

10 Short Beeps The shutdown register for CMOS RAM failed

11 Short Beeps The external cache is faulty

1 Long, 3 Short Beeps Memory Problems

1 Long, 8 Short Beeps Video Card Problems

 

Phoenix BIOS Beep Codes

Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

 

Code Description

1-1-3 CMOS read/write failure

1-1-4 ROM BIOS checksum error

1-2-1 Programmable interval timer failure

1-2-2 DMA initialisation failure

1-2-3 DMA page register read/write failure

1-3-1 RAM refresh verification failure

1-3-3 First 64k RAM chip or data line failure

1-3-4 First 64k RAM odd/even logic failure

1-4-1 Address line failure first 64k RAM

1-4-2 Parity failure first 64k RAM

2-_-_ Faulty Memory

3-1-_ Faulty Motherboard

3-2-4 Keyboard controller Test failure

3-3-4 Screen initialisation failure

3-4-1 Screen retrace test failure

3-4-2 Search for video ROM in progress

4-2-1 Timer tick interrupt in progress or failure

4-2-2 Shutdown test in progress or failure

4-2-3 Gate A20 failure

4-2-4 Unexpected interrupt in protected mode

4-3-1 RAM test in progress or failure>ffffh

4-3-2 Faulty Motherboard

4-3-3 Interval timer channel 2 test or failure

4-3-4 Time of Day clock test failure

4-4-1 Serial port test or failure

4-4-2 Parallel port test or failure

4-4-3 Math coprocessor test or failure

Low 1-1-2 System Board select failure

Low 1-1-3 Extended CMOS RAM failure

 

gumagana ba to sa lahat ng motherboards ?

[MitchCadiz]

not all... refer to your mobo manual

[SamanthaJones]

not all... refer to your mobo manual

 

i agree..

[wizard23]

is there a way to convert read-only powerpoint files to open office presentation files? i don't have windows office files kasi

in my laptop. need to convert these powerpoint files to open office for presentation purposes. thanks in advance for the advice.

[SamanthaJones]

is there a way to convert read-only powerpoint files to open office presentation files? i don't have windows office files kasi

in my laptop. need to convert these powerpoint files to open office for presentation purposes. thanks in advance for the advice.

click on this link >>> http://www.freefileconvert.com/

Edited May 19, 2010 by SamanthaJones

[wizard23]

^ thanks samantha jones!

[chewie]

hi guys, am trying to setup a linksys wireless router at home. kaso lang when am going through the startup setup process, nag error 311 and asking me to enable my wired network adapter. i've tried to change the ethernet properties, but to no avail. please help! TIA