Jump to content
  • Recently Browsing

    • No registered users viewing this page.

Who Is Into Scale Modelling?


coolestboy

Recommended Posts

May problem ang Tamiya Spray Works compressor. my compressor's gasket dried / cracked up after around 5 years & you have to replace the whole unit (e.g. disposable). I just jerry rigged my airbrush now to an ordinary compressor. Pwede kasi rubber tubing (like in the hospitals) naman kasi yung air hose.

 

Hey galing ah! I never thought about using rubber tubing for the airhose. I always have a problem with Badgers, you had to use a Badger airhose with them because the connection to their airbrush is non-standard. I was looking at connection adapters to remedy this but I still don't know if it will work with the airbrush. Thanks again for the tip!

Link to comment
Hey galing ah! I never thought about using rubber tubing for the airhose. I always have a problem with Badgers, you had to use a Badger airhose with them because the connection to their airbrush is non-standard. I was looking at connection adapters to remedy this but I still don't know if it will work with the airbrush. Thanks again for the tip!

 

No brainer Doc. It's the standard air supply hose supplied when you buy the Tamiya set. It does get yellow (but still not brittle) with age.

Link to comment
yung mga cheap kit *500-900* ok ba yun pang trial and error ??

 

Depends on the model subject.

 

1) Aircraft - already expensive for 1/72 & 1/48 aircraft. You can buy 1/72 aircraft at around P170

2) Armor - low end price of 1/35 armor (Trumpeter, old Academy)

3) Naval - puro malilingit na 1/700 kits lang ito

4) Sci Fi - if you consider the cheapo Macross knock offs, they're expensive (they cost at around P150)

 

If you want to practice with no PTSD regarding your cash outlay, I suggest you get the Academy planes na 1/72 or armor na 1/72 (available na) or the P1/144 aircraft. Maliliit nga lang. I think you can get a low end armor na 1/35 for P400

Link to comment

i just assembled USS Arizona battleship 1:700 scale ....lintek sarap sa hirap mga pare..hehehehe.....hirap gumawa ng mga masts....

 

i got it mura sa isang hobby store just for 220 kasi bagong brand Minihobby Models (made in china)...details are okay...ill post picture later...

 

this is my first attempt sa battleships.

Link to comment
i just assembled USS Arizona battleship 1:700 scale ....lintek sarap sa hirap mga pare..hehehehe.....hirap gumawa ng mga masts....

 

i got it mura sa isang hobby store just for 220 kasi bagong brand Minihobby Models (made in china)...details are okay...ill post picture later...

 

this is my first attempt sa battleships.

 

Minihobby Models is also by Trumpeter, it seems to be their low-end brand kaya cheap lang yan. I was able to get a 1/48 Hind for less than P400 so I bought the two versions. Did I ever mention that I have about 600+ unbuillt kits? My wife thinks I'm a scale model kit collector and that I should be posting on the colletors thread.

Link to comment
Minihobby Models is also by Trumpeter, it seems to be their low-end brand kaya cheap lang yan. I was able to get a 1/48 Hind for less than P400 so I bought the two versions. Did I ever mention that I have about 600+ unbuillt kits? My wife thinks I'm a scale model kit collector and that I should be posting on the colletors thread.

 

 

Sir how come you have so many pero d mo naman binubuo.....

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...