Jump to content

The Mitsubishi Lovers Thread


Recommended Posts

@sir messersmith welcome. taga south yung mekaniko ko na nagoverhaul sa auto ko. medyo madugo ang overhaul lalo na kung kailangan mo na magpamachine. you can try mr sarol sa san juan rin. btw ano pala mitsu mo and why the overhaul? kumatok na ba makina?

 

 

 

 

Ang ride ko mitsu lancer 98 EL pizza pie type...ung sa akin medyo nagbabawas ng langis , tuwing umaga kc check ko oil level nya sa dipstick, as in nagbabawas na sya cguro average ko 1 liter per month, nung huling pagawa ko pinalitan valve seal, tapos after 1 and a half month nagbabawas pa din, then sinabi ko sa mekaniko tapos nag pa compression test me, ok naman ang result then conclude nya local daw nakabit nyang valve seal, ayun na bad trip me kc sabi nya orig daw nilagay nila...sa inis ko naghanap n me ibang mekaniko at humingi me ng opinyon ng ibang refer sa aking mekaniko ng mga frend ko sabi maaring valve seal or piston ring...medyo nag iipon na me ng pampa ayos ng makina ko...uubusin ko muna ung 1 liter kong langis..isasabay ko na din sa pag change oil at tune up ko....

Link to comment

I see. sir advice ko lang kung magpapalit ng parts mabuti na ikaw na lang bumili then pakabit mo sa kanila. dami ayos na mitsu parts vendors like at atco and eldorado. At least sigurado ka sa ikakabit nila of course kailangan pa rin bantayan baka naman palitan nila yung part nyo. top overhaul lang po siguro will do it :cool:

Link to comment
mga bro,,pwde ba mgpatulong kakabili ko lng kc ng 2nd hand namitsubishi lancer gl 2007 model gray color,,hingi lng ako ng payo sa mga experts jan kung anu pwde ko gawin para mas gumanda porma ng auto ko.. :unsure:

Bro,

How is the condition? What's the mileage? May I suggest you bring your car to a reputable shop and have them check out all the functional aspects first.

Link to comment
Bro,

How is the condition? What's the mileage? May I suggest you bring your car to a reputable shop and have them check out all the functional aspects first.

 

 

bro ok nmn ung car..ung biyenan ko kc may alam sa mga sasakyan kya nacheck nmn bago bilhin...ask ko lng kung ano babagay na mag wheels sa gray color na mitsu gl 2007? mhina kc ko sa mga gnyan eh bka mgmukang jologs pa ung auto...may idea ka ba bro kung anu magandang idagdag pa dun?

Link to comment
my L200 has just been overhauled, lakas ng humatak...spent around 40K plus for the overhaul....

 

my next repairs would be in the Electrical section, hahahaahahha

 

:)

Hope you checked the radiator fan blades when the engine was brought out. Mine cracked and one fan section broke off. Good thing the water pump wasn't damaged.

 

Good luck with the electricals! Our 15 year old L200 already had the wiring harness replaced. The problem was the parts stores don't sell the harness anymore so we had someone do it from scratch.

 

How's your suspension? We had problems with the strut bars breaking several times. Eventually we found out it was due to the springs and the front end of the pickup was low.

Link to comment
Ok lang yan.. Ang impt maayos na ulit oto mo :thumbsupsmiley:

 

well thanks to God at least nabawasan ang mga worries ko.. my mga needed repairs pa ang dapat gawin sa car pero pagiipunan ko muna..

 

btw, any suggestions kung san paint shop pwede ako magpaestimate para magpachange color?

Link to comment
Hope you checked the radiator fan blades when the engine was brought out. Mine cracked and one fan section broke off. Good thing the water pump wasn't damaged.

 

Good luck with the electricals! Our 15 year old L200 already had the wiring harness replaced. The problem was the parts stores don't sell the harness anymore so we had someone do it from scratch.

 

How's your suspension? We had problems with the strut bars breaking several times. Eventually we found out it was due to the springs and the front end of the pickup was low.

 

 

yes i did check it, di naman siya kasi sa shop ko naman siya pinagawa eh, though walang cover talaga yung radiator fan blade ko, i bought kasi wala ng radiator fan...

 

so far, ok naman, i haven't repaired it yet, i bought a fog lamp pero tinanggal ko din, di kaya ng electrical eh or maybe i should have bigger wattage sa fuses, malaki kasi magagastos eh, mga around 5k daw if repair yung electrical niya so pinagpaliban ko muna, i just didn't use the fog lamps kasi baka masunog yung mga wiring ko,

 

my suspension will be the one needed repairs pards, medyo maingay na din, ang hirap talaga...that is going to be expensive, hehehehe

Link to comment
yes i did check it, di naman siya kasi sa shop ko naman siya pinagawa eh, though walang cover talaga yung radiator fan blade ko, i bought kasi wala ng radiator fan...

 

so far, ok naman, i haven't repaired it yet, i bought a fog lamp pero tinanggal ko din, di kaya ng electrical eh or maybe i should have bigger wattage sa fuses, malaki kasi magagastos eh, mga around 5k daw if repair yung electrical niya so pinagpaliban ko muna, i just didn't use the fog lamps kasi baka masunog yung mga wiring ko,

 

my suspension will be the one needed repairs pards, medyo maingay na din, ang hirap talaga...that is going to be expensive, hehehehe

Hope you can prioritize the wiring first. Yung sa amin muntik na masunog dahil marupok na insulation ng wires - wala pa kaming dinagdag na accessories. Panay sa labas ang parada ng sasakyan kaya bilad sa init at masmabilis lumutong yung insulation.

 

Yung suspension ng L200 hindi naman masyadong mahal kumpara sa ibang mitsubishi. Usual na bumibigay ay yung bushing ng lower suspension arm. Mapapansin ito kung yung kain ng front tires ay panay sa inner side. Kung nabili bago 1996 yung L200, talagang sakit ito. Yung rubber bushing walang metal support sa loob, pero pwedeng mapalitan ng may metal support. Noong unang bili namin, halos every year palit ng bushings hanggang nag-redesign ang Mitsubishi. Mula noon, every 7 years na palit.

Link to comment
well thanks to God at least nabawasan ang mga worries ko.. my mga needed repairs pa ang dapat gawin sa car pero pagiipunan ko muna..

 

btw, any suggestions kung san paint shop pwede ako magpaestimate para magpachange color?

 

 

san ba location mo bro?

Link to comment
Hope you can prioritize the wiring first. Yung sa amin muntik na masunog dahil marupok na insulation ng wires - wala pa kaming dinagdag na accessories. Panay sa labas ang parada ng sasakyan kaya bilad sa init at masmabilis lumutong yung insulation.

 

Yung suspension ng L200 hindi naman masyadong mahal kumpara sa ibang mitsubishi. Usual na bumibigay ay yung bushing ng lower suspension arm. Mapapansin ito kung yung kain ng front tires ay panay sa inner side. Kung nabili bago 1996 yung L200, talagang sakit ito. Yung rubber bushing walang metal support sa loob, pero pwedeng mapalitan ng may metal support. Noong unang bili namin, halos every year palit ng bushings hanggang nag-redesign ang Mitsubishi. Mula noon, every 7 years na palit.

 

my Mitsubishi L200 is actually 1999 Endeavor paps, December 1999 siya nabili, 2nd owner kami, yung 1st owner is salesman so di masyadong laspag, 30K kms pa lang takbo niya nung nabili namin last 2006 pa yun...

 

pero may kain na sa inner yung gulong ko pero pwede pa siya siguro ng mga 1 year pa, hehehehhe or christmas, wait ko yung bigay ng sister ko from abroad, hahahahha

 

as for my electrical, oo nga eh, one of these days, i will prioritize that, puro relay kasi ginawa nung electrician near my place di naman pala tama yun, nagtipid kasi ako eh...

 

pero lahat naman repaired na sa akin, malamig na yung aircon and malakas na siya humatak,

 

thanks for the advise and ideas papi, much appreciated!!

 

:goatee:

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...