Jump to content
  • Recently Browsing

    • No registered users viewing this page.

Computer Troubleshooting And Repair


Recommended Posts

pwede ba laptop probs dito?

 

my laptop had stopped running.

ive tried using the OS repair CD and the recovery Cd too,

ala na di rin mabasa.

 

di na rin siya mag start after i made an initial

safe mode booting.

 

HP pavilion yung laptop..

salamat mga peeps...

Link to comment

This is a common problem for CRT monitors after a long period of using it or have reached a certain burn time, the weldt connections on the pcb behind the tube gets loose due to heat generated from the tube when its on for a long time. sometimes, you lose the color red, yellow or blue, but if you use another monitor, the colors are fine.

 

if you can open the rear part of your monitor, you should find a pcb just behind the end of the tube. There are connections there that would need to soldered so you'll get the color of your monitor back.

 

 

 

sure na may prob ang monitor mo check mo ang video cable baka me lost connection pag wala sigurado sa loob na ng monitor yong pvc board na nakakabit sa picture tube me lost connection doon kailangan lang ng hinang para ma i fix mo connection kung d mo ito kaya kailangan mo na ng mag momonitor o repairman  :P

Link to comment
my laptop had stopped running.

 

what do you mean by stopped running? OS prob ba or does turn on na talaga?

 

madaming cause yan, pwedeng virus or worm

 

or heat issues

 

Can any techies here advise me what to do with the Trojan Zlob? Can't remove it with my Trend Micro PCcillin and the Mcafee. It can be quarantined but keeps appearing when I do a scan.

 

Please advice

 

mag OS reinstall kana para sure.

Link to comment
hi all,

 

may possibility ba na ma erase ang network component (NetBEUI,IPX/SPX,TCP/IP) without human intervention?

 

please help.

 

TY

 

Yes...theoretically, a virus or any software can modify your network stack although I have never heard of a virus that does this. It is more likely that someone deleted it either accidentally or intentionally... :headsetsmiley:

Link to comment

help naman po..give up nko sa issue ng laptop ko..di na kaya ng powers ko...well here's the situation:

 

- my laptop has a toshiba dvd combo drive

- one day, it quit being detected by windows, although its still getting detcted by BIOS, which means that there's no need to do a tear down of the laptop,

- i already deleted the upper and lower filters in the registry

- i checked device manager and i have a bang on the toshiba dvd drive. it has an (!) mark meaning the driver is not installed,so i removed the ide channel(all of em), rebooted the system, on reboot, it detected a new hardware, but still it cant find a suitable driver..

- optical drives should automatically be detected by the OS right?so whats happening with my laptop?do you think i need an OS reinstall(format)?

Link to comment
help naman po..give up nko sa issue ng laptop ko..di na kaya ng powers ko...well here's the situation:

 

- my laptop has a toshiba dvd combo drive

- one day, it quit being detected by windows, although its still getting detcted by BIOS, which means that there's no need to do a tear down of the laptop,

- i already deleted the upper and lower filters in the registry

- i checked device manager and i have a bang on the toshiba dvd drive. it has an (!) mark meaning the driver is not installed,so i removed the ide channel(all of em), rebooted the system, on reboot, it detected a new hardware, but still it cant find a suitable driver..

- optical drives should automatically be detected by the OS right?so whats happening with my laptop?do you think i need an OS reinstall(format)?

 

check ka kung me firmware. o kaya try mong delete ung optical drive sa dev man para ma auto install ng os mo.

 

hope this helps.

Link to comment
hi all,

 

may possibility ba na ma erase ang network component (NetBEUI,IPX/SPX,TCP/IP) without human intervention?

 

please help.

 

TY

 

pwede po sir. khet na nde ako expert sa networking. anong os po? SP2 ba? try mo pong mag reset ng winsock settings.

 

kung XP ka na may SP2:

type mo to sa cmd prompt "netsh winsock reset catalog" without the quotes.

 

hope this helps.

Link to comment
check ka kung me firmware. o kaya try mong delete ung optical drive sa dev man para ma auto install ng os mo.

 

hope this helps.

 

 

i already tried removing the drive from the device manager, and rebooted the system, its getting the detected, as well as the model and brand name of the drive, but the wizard cant find any suitable/compatible driver. i also try to browsed it manually in the i386 folder in windows, but still not there.

 

but i will try looking for a firmware for the drive, since i havent tried it yet

 

anybody else has an idea on what to do? cuz i dont want to do an OS reinstall cuz i dont want to lost my files... :(

 

btw,thanks _Pabling for the quick response...

Link to comment
help naman po..give up nko sa issue ng laptop ko..di na kaya ng powers ko...well here's the situation:

 

- my laptop has a toshiba dvd combo drive

- one day, it quit being detected by windows, although its still getting detcted by BIOS, which means that there's no need to do a tear down of the laptop,

- i already deleted the upper and lower filters in the registry

- i checked device manager and i have a bang on the toshiba dvd drive. it has an (!) mark meaning the driver is not installed,so i removed the ide channel(all of em), rebooted the system, on reboot, it detected a new hardware, but still it cant find a suitable driver..

- optical drives should automatically be detected by the OS right?so whats happening with my laptop?do you think i need an OS reinstall(format)?

 

This usually means a corruption within Window's HAL which is preventing it from recognizing the device properly. I usually just format the system or do a repair since it's quite troublesome to pinpoint. :headsetsmiley:

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...