Jump to content

What's Your Current Pc System ?


Recommended Posts

sori dude... TWINX1024 3200C2PT pinadala eh.. naubusan daw ng LL,

yung platinum ang heatspreader

2-3-3-6 timing nya, di ko na binago..k lang naman sakin yung performance

 

:)

 

What's the revision number?

 

If 4.x it's a TCCD/TCC5. Kaya pa yan 2-2-2-5. I used to have that pair. Just try it, you will see it's hindden power.

 

If 1.x/2.x, it must be one of the Winbond variants (BH5/CH5/UTT). Feed enough voltage and it can go high clock speed maintaining tight 2-2-2-5 timings

 

Other rev numbers then I guess your not lucky. (Could be Infneon or Mosel Vitelics)

 

:D

Link to comment
i think they are samsungs, I peeked at the chips..heehe.

i used to have DDR333 samsungs (Dual-side) with heatspreaders,till

I upgraded to DDR400 corsairs (3200CPT) dual channel..so basically

it feels a little faster right now than before because of dual channel.

 

 

TCCD/TCC5 are Samsung chips. Go ahead give it a try 2-2-2-5 is easy for these sticks. There will be considerable improvement when you tighten your memory timings.

Link to comment

bumubuo ako ng PC. first time ko lang. hinihintay ko pa madeliver yung processor and motherboard pero ito yung specs:

 

Pentium D 830 (yung dual core)

AOpen mobo 945Pa-PLF

Zalman Cu7700 cpu Fan/heatsink (this baby's huge - will use arctic silver 5 thermal paste)

1 gig PQI DDR2 5400 667mhz (2X512MB)

250 gig seagate sata hard drive

Sapphire Radeon X700PRO 256MB 128bit (not much of a gamer so low end lang doble or triple kasi presyo ng mga high end)

Centurion Casing black with transparent side panel

Saga Power supply dual 12V rail

NEC DVD RW drive (mura)

will use my old monitor and pther peripherals

 

......sana gumana first time ko talaga mag aasemble eh.

Link to comment
Hi guys... question lang sana.

ano ang dual core processor?

 

Is it faster (and more expensive)?

 

 

Eto cut and paste description lang ng intel...kahit ako di masyado familiar. binili ko lang kasi may discount.

 

 

"The Intel® Pentium® D Processor is a dual-core processor for the desktop PC. It consists of two complete execution cores in one physical processor, both running at the same frequency. Both cores share the same packaging and the same interface with the chipset/memory.

 

A dual-core processor is like a four-lane road — it can handle up to twice as many cars as a two-lane road without making each car drive twice as fast.

 

The Pentium D processor when combined with the Intel® 945 Express Chipset creates a platform that will enable new computing experiences. This new platform delivers value by providing additional computing resources that expand the PC's capabilities in the form of higher throughput and simultaneous computing. Similarly, with an Intel dual-core processor-based PC, users can perform multiple tasks such as downloading music and gaming simultaneously."

Link to comment
Hi guys... question lang sana.

ano ang dual core processor?

 

Is it faster (and more expensive)?

 

Dual-core processor is two microprocessor core in the same package. It effectively gives you two processor in one socket. Windows will see your system being dual processor.

 

Is it faster than single cores? It depends on what application is being run. if an application is multi-threaded (instructions are broken down into smaller chunks called thread that can be sent to the processor at the same time) it will definitely be faster, theoretically twice as single core. However, single core applications like most games are single threaded and will not take advantage of the second core.

 

Another advantage of dual core is that your system will be a lot responsive given many applications running at the same time.

 

Of course it is much expensive than single core

Link to comment
My new gaming rig.

 

AMD Athlon64 4000+ San Diego "God" Batch

DFI Lanparty NForce4 Ultra-D

2 x 512mb OCZ 4800 Platinum Ltd. Edtion

BFG 7800GTX OC PCI-E

Sound Blaster Audigy 2 ZS

Pioneer DVR-A09XLB 16x DVD+/- RW with Dual Layer Write

Toshiba SDR5372 16x DVD+/- RW with Dual Layer Write

3 x 200gb Seagate SATA with NCQ

Apacer Internal MMC Reader (Black)

Antec True Power 1 550w w/ PFC and EPS (Single rail is still the best for overclocking)

DIY Watercooling system for CPU core only (Currently sidelined, modding to external h20 kit)

Thermaltake Bigtyphoon (Using now)

Thermaltake Kandalf Black Casing

D-Link DWL-G520+ Wifi 802.11g Card w/ Edimax 2dbi Antenna

Logitech Internet Pro Black Keyboard

Logitech Optical Mouse w/ BFG Teflon pad

Logitech Z5500 Digital 5.1 Sound System

Edimax 5dbi Antenna (for better reception for wifi)

1 x UV Rounded IDE Cable

1 x UV Fdd Rounded Cable

3 x UV Sata Cable

AOC 17" LCD LM-720 Monitor

 

My back up/work/family rig

 

Shuttle XPC SN95G5 v.2

AMD Athlon64 3200+ Winchester

2 x 512 Twinmos DDR400 (PC3200)

ATI Radeon 9550 EE v.2.2

1 x 80gb Seagate SATA

Edimax EW-7128G 802.11g Wifi card

Edimax 5dbi Antenna

Logitech Internet Pro Black Keyboard and Mouse w/ BFG Teflon Pad

Freebie Speakers

Freebie 14" Kadz CRT Monitor

 

Family Laptop

Apple Powerbook G4 (Nasa sis ko lagi, huhuhu)

 

Router:

D-link DI-624+ Wireless router

 

Updated my 2 x 512mb OCZ 4800 Platinum Ltd. Edtion to a 2 x 512mb OCZ 4000 VX :D

Traded it cuz my San Diego is 1 out of 5 procs which has bad mem controller, can't run @ 300x9 @ 2.5-4-4-10 :( Could run @ 300x8 but thats the stock speed of my Sandy. :( If 270x10, I need the same timings of the 300 to run properly w/ errors :( Bulok talaga tcc5, still like tccd :D

 

Here's a comparison between the performance of my 4800 and my 4000vx (at their tightest timings)

 

OCZ Platinum 4800 Ltd. Edition

http://img395.imageshack.us/img395/6447/25xj.jpg

http://valid.x86-secret.com/show_oc?id=34377

Was able to run @ 230 @ 2-2-2-8 w/ 2.9v VDIMM, semi stable, got 2-3 mem errors for 3 hours of memtest. :D could run @ 250-270 but with loose timings :D

 

OCZ Gold 4000 VX

http://img228.imageshack.us/img228/3528/cpu81oh.jpg

http://valid.x86-secret.com/show_oc?id=39489

Able to run @ 256x11 @ 2-2-2-5 @ 3.5v VDIMM w/o even any burn ins! :D sweet :D Although the mem is toasty hot! Needed active cooling for the mems :D Could reach 270 @ the same timings if has some 1 or 2 day burn in and probably @ 3.6v VDIMM :D

Link to comment

P4 3.4 ghz

GeForce FX 6800 ultra 256 Mb

1 Gig DDR

Asus P4S800

20 GB hardisk

leadtek Winfast tv2000 xp

windows xp home edition

LG DVD ROM 16x

LG CD ROM 48x

Lite-on 52x32x52

1.44 floppy drive

Creative Webcam

Thermaltake Fan

A4 tech keyboad A style usb

genius netscroll serial port

creative inspire 2500

genius mic

normal headset

conexant modem v.92

14 inch tvm monitor

boka case

 

 

post-55138-1127566803.jpg

 

post-55138-1127566929.jpg

 

post-55138-1127567094.jpg

 

post-55138-1127567208.jpg

Link to comment
ssshhhhh :D quiet nalang tyo :D hehehe :D

 

hahah, makukuha ko na sa Monday yung OCZ P3200 Gold edition. Hopefully, this will be the last piece of my puzzling rig. I'm going for 250Mhz 1:1 @ 2-2-2-x timings (3.3 - 3.5v Vdimm) on this BH UTT. Then pahinga muna from upgrade and replenish funds. Come December, hopefully X2 dual cores take a price cut and will definitely go for it.

 

Hoping to get an Athlon64 X2 3800+ this december and drop it in my current rig, no sweat. Oh may isa pa palang missing piece. Yung Zalman CNPS9500. I figured it will perform on the same level as the TT big typhoon but it looks a lot nicer. :cool:

Link to comment
hahah, makukuha ko na sa Monday yung OCZ P3200 Gold edition. Hopefully, this will be the last piece of my puzzling rig. I'm going for 250Mhz 1:1 @ 2-2-2-x timings (3.3 - 3.5v Vdimm) on this BH UTT. Then pahinga muna from upgrade and replenish funds.  Come December, hopefully X2 dual cores take a price cut and will definitely go for it.

 

Hoping to get an Athlon64 X2 3800+ this december and drop it in my current rig, no sweat. Oh may isa pa palang missing piece. Yung Zalman CNPS9500. I figured it will perform on the same level as the TT big typhoon but it looks a lot nicer.  :cool:

 

afaik it runs ata @ 230-240 2-2-2x @ 3.3-3.5vdimm :D but yes, you can do 250 w/ burn ins :D focus with 2-2-2-5 or 2-2-2-6,, the 2-2-2-5 and 2-2-2-6 has the same speed for the gold :D 2-2-2-8 is slower :D remember, utt's can reach a killer 4.2vdimm but of course, you don't want to invalidate the warranty diba?:D hehehe :D im not quite sure but 2-2-2-7 seems to have the same speed as 2-2-2-5 and 2-2-2-6 :D try it out nalang :D

 

Im not planning to shift to x2 right now :D i won't need the extra proc since this pc is for bechies and games :D plus, 1 out of 3-5 dual procs has one bad proc, meaning you might oc your 1st proc @ 2800Ghz, but the other one might only run to 2.4 :D Not all procs are the same you know :D like my sandy, it is the "God" Batches, E3-E6, but, minalas, i have the one with a bad mem controller :( can't run @ 300x9 2.5-4-4-10 but can run @ 230x12 @ 2-2-2-8 :D weird noh?:D but maybe I'll sell my sandy and buy the God of "God Batches" (e1 steppping) hehehe :D

Link to comment
hahah, makukuha ko na sa Monday yung OCZ P3200 Gold edition. Hopefully, this will be the last piece of my puzzling rig. I'm going for 250Mhz 1:1 @ 2-2-2-x timings (3.3 - 3.5v Vdimm) on this BH UTT. Then pahinga muna from upgrade and replenish funds.  Come December, hopefully X2 dual cores take a price cut and will definitely go for it.

 

Hoping to get an Athlon64 X2 3800+ this december and drop it in my current rig, no sweat. Oh may isa pa palang missing piece. Yung Zalman CNPS9500. I figured it will perform on the same level as the TT big typhoon but it looks a lot nicer.  :cool:

 

afaik it runs ata @ 230-240 2-2-2x @ 3.3-3.5vdimm :D but yes, you can do 250 w/ burn ins :D focus with 2-2-2-5 or 2-2-2-6,, the 2-2-2-5 and 2-2-2-6 has the same speed for the gold :D 2-2-2-8 is slower :D remember, utt's can reach a killer 4.2vdimm but of course, you don't want to invalidate the warranty diba?:D hehehe :D im not quite sure but 2-2-2-7 seems to have the same speed as 2-2-2-5 and 2-2-2-6 :D try it out nalang :D

 

Im not planning to shift to x2 right now :D i won't need the extra proc since this pc is for bechies and games :D plus, 1 out of 3-5 dual procs has one bad proc, meaning you might oc your 1st proc @ 2800Ghz, but the other one might only run to 2.4 :D Not all procs are the same you know :D like my sandy, it is the "God" Batches, E3-E6, but, minalas, i have the one with a bad mem controller :( can't run @ 300x9 2.5-4-4-10 but can run @ 230x12 @ 2-2-2-8 :D weird noh?:D but maybe I'll sell my sandy and buy the God of "God Batches" (e1 steppping) hehehe :D

 

Regarding yung CNPS9500, ok sya :D ganda tingnan :D but i'd rather buy the BT :D 1 is that I can still change my fan, which means I can increase the performance of my hsf, making it cooler :D (Delta fans :D what a monster! :D) 2, I chose BT than CNPS9500 due to the fact that ifever the fan of BT will give up on me, I can still replace it :D unlike the CNPS :D

 

Swerte mo hindi ka DFI, kainis tong sakin e :D mabusisi sobra :D before I oc and shutdown my pc, babaklasin ko pa mga jumpers and do bios changes pa :( hassle :( but galeng ng perf :D

Link to comment

Currently using:

 

Intel P4 3.4E w/ Coolermaster Jet 4

ASUS P4C800 w/ Coolermaster Blueice

Inno3D 6600GT w/ Jetart

2 x 512 Geil Value DDR400

160gb Seagate SATA

ASUS DVD-Rom

ASUS CD-Rw

Apacer 15 in 1 Internal Card Reader

Casetek 1018-1b

Task 450w PSU

6 x Akasa 80mm Blue Led Fans

1 x Coolermaster 120mm Blue LED Fan

Logitech mx-518 gaming mouse

A4tech Keyboard

AOC 17 Vlr

Dlink 56k Modem

MSI Bluetooth Dongle

 

 

B)

Link to comment
afaik it runs ata @ 230-240 2-2-2x @ 3.3-3.5vdimm :D but yes, you can do 250 w/ burn ins :D focus with 2-2-2-5 or 2-2-2-6,, the 2-2-2-5 and 2-2-2-6 has the same speed for the gold :D 2-2-2-8 is slower :D remember, utt's can reach a killer 4.2vdimm but of course, you don't want to invalidate the warranty diba?:D hehehe :D im not quite sure but 2-2-2-7 seems to have the same speed as 2-2-2-5 and 2-2-2-6 :D try it out nalang :D

 

Im not planning to shift to x2 right now :D i won't need the extra proc since this pc is for bechies and games :D plus, 1 out of 3-5 dual procs has one bad proc, meaning you might oc your 1st proc @ 2800Ghz, but the other one might only run to 2.4 :D Not all procs are the same you know :D like my sandy, it is the "God" Batches, E3-E6, but, minalas, i have the one with a bad mem controller :( can't run @ 300x9 2.5-4-4-10 but can run @ 230x12 @ 2-2-2-8 :D weird noh?:D but maybe I'll sell my sandy and buy the God of "God Batches" (e1 steppping) hehehe :D

 

Regarding yung CNPS9500, ok sya :D ganda tingnan :D but i'd rather buy the BT :D 1 is that I can still change my fan, which means I can increase the performance of my hsf, making it cooler :D (Delta fans :D what a monster! :D) 2, I chose BT than CNPS9500 due to the fact that ifever the fan of BT will give up on me, I can still replace it :D unlike the CNPS :D

 

Swerte mo hindi ka DFI, kainis tong sakin e :D mabusisi sobra :D before I oc and shutdown my pc, babaklasin ko pa mga jumpers and do bios changes pa :( hassle :( but galeng ng perf :D

 

 

Hay.. dumating na yung ocz gold ko. Excited agad ako i-test. k*ll joy, defective yung isang stick. Ayun RMA agad. Buti na lang mabilis response ng OCZ. Wahhh, sana ng G.Skill GBGH na lang ako <_<

Link to comment

I'm convinced sa design ng CNPS na mas efficient sya. I agree with you na downside nya is yung fan. But, I'm sure there will come a modder you can decipher how to replace it with a better fan.

 

I'm just waiting for the stocks to be available. BT is well thought off by TT. But I really hate the way it looks. heheheh :D Para kasing makakasira sa overall look ng rig ko. :cool:

Link to comment
Hay.. dumating na yung ocz gold ko. Excited agad ako i-test. k*ll joy, defective yung isang stick. Ayun RMA agad. Buti na lang mabilis response ng OCZ. Wahhh, sana ng G.Skill GBGH na lang ako  <_<

 

lolz :D Comparing OCZ sa G. Skill, no question OCZ still reigns supreme :D Although G. Skill made several enthusiasts take a 2nd look at their mems, the incredible customer service @ great value still is good :D Anyway, G. Skill (as some critics said) got lucky w/ their TCCD mems ngayon, hopefully, G. Skill won't mess up their other mems in the near future, para di masira rep*tation nila :D

 

Heard G. SKill has a heatspreader na :D Red daw, para daw sa anniv ng G. Skill yun :D Pero kung sa Japorms pa naman ng mems ang pinaguusapan, nothing beats OCZ :D Kintab, sarap dilaan :D hehehe :D

Link to comment
lolz :D Comparing OCZ sa G. Skill, no question OCZ still reigns supreme :D Although G. Skill made several enthusiasts take a 2nd look at their mems, the incredible customer service @ great value still is good :D Anyway, G. Skill (as some critics said) got lucky w/ their TCCD mems ngayon, hopefully, G. Skill won't mess up their other mems in the near future, para di masira rep*tation nila :D

 

Heard G. SKill has a heatspreader na :D Red daw, para daw sa anniv ng G. Skill yun :D Pero kung sa Japorms pa naman ng mems ang pinaguusapan, nothing beats OCZ :D Kintab, sarap dilaan :D hehehe :D

 

Poging-pogi nga yung heatspreader ng OCZ, shiny gold pa kulay. Comparing sa ibang mems nahawakan ko mabigat ang OCZ. Minalas lang cguro ako sa pair na nakuha ko. Anyway, sana yung kapalit ay ok na. I am still not buying on the hype with G.skill. Tsaka parang magulo product offerings nila. Daming overlapping models.

 

Oh well, sana dumating agad yung replacement mems ko.

Link to comment

*os

UPDATED:

My Alienware Digital Content Creation System

 

SYSTEM SPECS:

 

Operating System: (Dual Boot)

Primary OS - Windows XP Professional 64Bit Edition

Secondary OS - Ubuntu Linux 5.04

 

Processors:

Dual Intel Xeon 3.6GHz Hyperthreading EM64T 64-bit 800 MHz FSB 1MB

 

Motherboard:

X2 Dual Xeon SLI Tumwater MOBO

 

Power Supply Unit:

Enermax EG851AX-VH 660W with Opti-UPS ES1500C 1400VA 980W

 

Memory Chips:

3GB Dual Channel DDR2 Registered ECC SDRAM at 400MHz

 

Video Card:

NVIDIA Quadro FX 4400 PCI Express 512MB GDDR3 Dual-DVI S-Video

 

Display:

Apple 30" Cinema HD Display at 2560 x 1600 Resolution

 

Sound Card:

Primary Digital Audio - Creative Audigy 2 ZS High Definition 7.1 Surround PCI

Secondary Audio - Creative Extigy High Definition 5.1 Surround USB 2.0

 

Speakers:

Klipsch ProMedia Ultra 5.1 Theatre Surround Sound

 

System Drives:

WinXP: 148GB SATA RAID-0 (74GBx2) Western Digital Raptor 10,000 RPM 16MB Cache

Ubuntu: 72GB SATA RAID-0 (36GBx2) Western Digital 10,000 RPM 16MB Cache

 

Storage Drives:

WinXP: 800GB SATA RAID-0 (400GBx2) Hitachi Deskstar 7K400 7,000 RPM 16MB Cache

Ubuntu: 500GB SATA RAID-0 (250GBx2) Hitachi Deskstar 7K250 7,000 RPM 16MB Cache

 

I/O Controllers:

SIIG USB 2.0 5-Port PCI and SIIG Firewire 800 3-Port PCI

 

Hard Drive Bay:

Hot-Swap Cage with 80mm Cooling Fan

 

Primary Optical Drive:

NEC ND-3520 16x Dual Layer DVD±R/W Recorder

 

Secondary Optical Drive:

Plextor PlexWriter Premium 52x32x52x CD-R/W Recorder

 

Removable Storage:

10-in-1 Digital Media R/W

 

Network Connection:

Integrated High Performance Gigabit Ethernet

 

More Pictures And Info At http://www.info.com.ph/~cyberray/alienware/

 

http://www.info.com.ph/~cyberray/alienware/myrig.jpg

 

 

:mtc:

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...