hobby E-cigarettes and Vaping

[SiLvErClAw]

sa nagtatanong about RX200S, eto yung details and specs

 

Large of the screen. Reuleaux RX200 is 0.69inch and Reuleaux RX200S is 0.96inch, much larger and you can see all parameters more clearly.

Output Mode. Not only with VW/TC-Ni/TC-Ti/TC-SS but also TCR Mode, which can provide you with various vaping enjoyment.

Maximum Temperature Range in centigrade degree up to 315°C



Specifications of Reuleaux RX200S:
Size: 50.0*40.0*84.0mm
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-200W
Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range: 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/ 200-600°F (TC modes)

[aoshix]

Thanks sir silverclaw. What tank would you recommend the griffin or the gemini? Where could I get juices with high vg? Thanks

[Queen Darkeinjel]

Mukhang hassle ung battery release button nka siwang sa gilid. Try mo ibagsak agad kung matibay nga talaga voidray haha

 

actually binagsak nung taga shop yung unit from chest height 5'10-ish. It still fired after...

 

probably then matibay nga siya.

 

this is precisely why am sticking with my mechanical tube mods, i can drop it and it would still fire no matter what. no electronic component to worry about. my atty is still a dripper, no glass, no fuss.

Edited May 25, 2016 by DarkEinjel

[SiLvErClAw]

 

actually binagsak nung taga shop yung unit from chest height 5'10-ish. It still fired after...

 

probably then matibay nga siya.

 

this is precisely why am sticking with my mechanical tube mods, i can drop it and it would still fire no matter what. no electronic component to worry about. my atty is still a dripper, no glass, no fuss.

matibay nga

[TheShadow]

just bought the sigelei 213 dual batt mod the other day. I must say, my batteries last longer in this one compared to my rx200 for some reason.

 

and for people here that have been using the avocado 24, any tips with the build? lakas ng spitback eh with regular claptons. unlike my experience with the 22. parang mas smooth ang drag ng 22.

[SiLvErClAw]

just bought the sigelei 213 dual batt mod the other day. I must say, my batteries last longer in this one compared to my rx200 for some reason.

 

and for people here that have been using the avocado 24, any tips with the build? lakas ng spitback eh with regular claptons. unlike my experience with the 22. parang mas smooth ang drag ng 22.

 

 

mukhang ok yung sigelei, a?

 

wala po ako experience sa avocado, e...

[Queen Darkeinjel]

Guys, any suggestions for an RDA? Something in the 1K range. Need to pair it when I buy hubby's voidray next week.

 

The week after, I might get myself either a Voidray or a Pico. Will pair that with my MH Mini and the ERA will go with the MH tube

[SiLvErClAw]

Guys, any suggestions for an RDA? Something in the 1K range. Need to pair it when I buy hubby's voidray next week.

 

The week after, I might get myself either a Voidray or a Pico. Will pair that with my MH Mini and the ERA will go with the MH tube

 

 

if you are not picky, most clones are within the 1K php range

 

baka me mahanap ka na 1:1 clone ng madhatter, that would be good

[Queen Darkeinjel]

if you are not picky, most clones are within the 1K php range

 

baka me mahanap ka na 1:1 clone ng madhatter, that would be good

Enks. I may pair tyhe ERA with a VW mod in order to save the insulator.

 

And yup, it's about 3 or so years old and it still works. Durable and dependable!

[SiLvErClAw]

Enks. I may pair tyhe ERA with a VW mod in order to save the insulator.

 

And yup, it's about 3 or so years old and it still works. Durable and dependable!

 

 

yup, era is a tough atty

 

I had one before, but the insu got fried since my unit auto fired

[🌟HUDAS🌟]

Anyone using a syriege to inject the juice? Hirap kasi lagyan ng juice velocity ko ang sobra liit kase ng butas. Any advice guys?

Edited May 30, 2016 by 🌟HUDAS🌟

[Queen Darkeinjel]

yup, era is a tough atty

 

I had one before, but the insu got fried since my unit auto fired

Awwww, too bad.

 

I never experimented on the ERA's build. I guess that's why it lasted.

 

There are units that auto fire at times. The bullet did once and fried a battery, but the Reactor is still firing. Although it's having a problem with loose screws now.

 

My torpedo mod is still good but the switch/lock is bent na from getting dropped often enough.

 

Can't wait for the new mods to come home. Void Ray for the hubby + a new atty. For me, am torn - void ray or pico. If it's the void ray, i might buy a new atty and keep the ERA + torpedo mod as back up to the back up. If it's the pico, I'll stick with the ERA. Decisions, decisions.

[TheShadow]

 

 

mukhang ok yung sigelei, a?

 

wala po ako experience sa avocado, e...

Ok na ok sir, yung price lang hindi ok hahaha. Got mine for 3,999, most shops sell them for 4,300 above. Its really light and compact. I like the preheat option for thick coils.

[SiLvErClAw]

Anyone using a syriege to inject the juice? Hirap kasi lagyan ng juice velocity ko ang sobra liit kase ng butas. Any advice guys?

 

teka, velo?

 

anong velo yan?

 

normally, anlalake ng mga tips ng velo a

 

Awwww, too bad.

 

I never experimented on the ERA's build. I guess that's why it lasted.

 

There are units that auto fire at times. The bullet did once and fried a battery, but the Reactor is still firing. Although it's having a problem with loose screws now.

 

My torpedo mod is still good but the switch/lock is bent na from getting dropped often enough.

 

Can't wait for the new mods to come home. Void Ray for the hubby + a new atty. For me, am torn - void ray or pico. If it's the void ray, i might buy a new atty and keep the ERA + torpedo mod as back up to the back up. If it's the pico, I'll stick with the ERA. Decisions, decisions.

 

hehehehhehe go with the voidray, para medyo rugged and tough

 

Ok na ok sir, yung price lang hindi ok hahaha. Got mine for 3,999, most shops sell them for 4,300 above. Its really light and compact. I like the preheat option for thick coils.

 

 

uy! may preheat!

 

interesting

[Queen Darkeinjel]

 

hehehehhehe go with the voidray, para medyo rugged and tough

 

I might go with the void ray nga. Also, like what we talked about, since ERA still works, I would stick it sa void ray to save it and prolong its life even more.