chunkyhunk Posted June 24, 2008 Share Posted June 24, 2008 nice kits sir, btw what did you use on the panel lines, marker or wash? great job on your wing ka...im having some balancing issues with mine when it comes to the buster rifle I used a Sharpie Fine point permanent marker. Though permanent, you can actually rub it off with your fingers (or a dull knife) when you make mistakes. Having a steady hand helps. Also, the more you use these markers, the thicker the line gets, and it's harder to panel narrow grooves. The buster rifle did give me a problem. I just "locked" the gun brace onto the elbow joint. It took a lot of tweakiing to get it right. I'm pretty sure I'll be getting the same problem with the Wing Zero, if and when I get it. Quote Link to comment
chunkyhunk Posted June 28, 2008 Share Posted June 28, 2008 Working on Gundam 00 Kyrios... Quote Link to comment
destron Posted June 30, 2008 Share Posted June 30, 2008 nice kits sir, btw what did you use on the panel lines, marker or wash? great job on your wing ka...im having some balancing issues with mine when it comes to the buster rifle I tried modifying an RX-78 once. Tried markers and wash for panel lines but hated it. So I repainted them back and just knifed it to darken/deepen the lines. This way the lines look naturally dark, not just drawn black. If you can see the professionally done models on magazines you would notice that there is little or even no panelling done. Still, it depends on the hobbyist preference. Quote Link to comment
chunkyhunk Posted June 30, 2008 Share Posted June 30, 2008 The GN-003 Kyrios... Quote Link to comment
rune Posted July 1, 2008 Share Posted July 1, 2008 nice job on the kyrios...is this a 1:00 or 144? Quote Link to comment
chunkyhunk Posted July 1, 2008 Share Posted July 1, 2008 nice job on the kyrios...is this a 1:00 or 144? 1/100. I've had it with the 1/144s. I want more detail and challenge. I'm basically "saving up" for the 1/60 PG Wing Zero. Quote Link to comment
leave Posted July 2, 2008 Share Posted July 2, 2008 I'm planning to sell gundam models, if there's anyone interested in any model Quote Link to comment
chunkyhunk Posted July 2, 2008 Share Posted July 2, 2008 I'm planning to sell gundam models, if there's anyone interested in any model Post them here. Are they still in boxes or are they already assembled ? Quote Link to comment
rune Posted July 5, 2008 Share Posted July 5, 2008 by any chance are you guys members of mechapinoy? Quote Link to comment
leave Posted July 5, 2008 Share Posted July 5, 2008 they're unassembled, the boxes are open though but the runners are still sealed inside their plastics. I'll post some soon Quote Link to comment
chunkyhunk Posted July 5, 2008 Share Posted July 5, 2008 they're unassembled, the boxes are open though but the runners are still sealed inside their plastics. I'll post some soon Don't forget the prices and description. Will yours be cheaper as compared to those sold at malls? Quote Link to comment
jetstorm Posted July 7, 2008 Share Posted July 7, 2008 been some years na since i last assembled a gundam kit. so far ang mga naassemble ko na are the following: MG:ZGMF-X10A Freedom (broke 4 parts due to move to a new house. Fortunately Bandai replaces up to 4 parts for free!)MSZ-006 Zeta Gundam v1 (broken due to faulty assemble) HG 1/144:RX-78-2 Gundam (someone either stole this or misplaced it in my former house)RX-178 Gundam Mk II + G DefenserMSZ-006 Zeta GundamZGMF-X10A Freedom (my first one. nasobrahan sa thinner, so I had to fix cast it)ZGMF-X09A Justice (someone either stole this or misplaced it in my former house)ZGMF-X20A Strike FreedomZGMF-X19A Infinite JusticeXXXG-00W0 Wing Gundam Zero (EW)XXXG-01D2 Gundam Deathscythe Hell (EW)XXXG-01H2 Gundam HeavyArms Kai (EW)XXXG-01SR2 Gundam Sandrock Kai (EW)XXXG-01S2 Altron Gundam (EW) Plan ko buuhin yung RX-93 Nu Gundam ko, but I rarely have time (been very busy with kids and all). Gusto ko sana makabili ng mga kits na ito sometime soon siguro pag may pera na: MG:MSZ-006 Zeta Gundam v2RX-93-2 Hi Nu GundamZGMF-X20A Strike Freedom HG 1/144:PMX-003 The OZGMF-X13A ProvidenceZGMF-X42S DestinyZGMF-X666S LegendGN-001 Gundam ExiaGN-002 Gundam DynamesGN-003 Gundam KyriosGN-004 Gundam NahdleeGN-005 Gundam Virtue Quote Link to comment
chunkyhunk Posted July 7, 2008 Share Posted July 7, 2008 Are the GN-00 1/144 designations different from the 1/100? The kits I have assembled so far are the Exia (01), Dynames (02), Kyrios (03). The virtue is designated as 04, and the Astrea is 05 (I'm supposing this is an upgraded model of the Exia since they basically look the same). I'm planning to complete these. Quote Link to comment
ligtasan Posted July 7, 2008 Share Posted July 7, 2008 1/100. I've had it with the 1/144s. I want more detail and challenge. I'm basically "saving up" for the 1/60 PG Wing Zero. If you haven't gotten it yet, set aside about 4-5 months of free time in order to file, primer, paint, and assemble the headache inducing, duling making SOB. Too many small parts parts, needs a lot of work, but in the end it's worth it if you did a good job. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.