webmaster_ph Posted December 3, 2007 Share Posted December 3, 2007 try using an air-brush to clean the keyboard i hope this helps Quote Link to comment
Google Posted December 3, 2007 Share Posted December 3, 2007 here's an odd problem: the pwm controller went bust w/o breaking the fuse. what gives? high in-rush? are you talking about the PWM bro? technically kasi, the PWM temp is the CPU temp. so baka nasunog o nag-overheat, not due to electrical surge, but due to the temperature, so the fuse is intact. Quote Link to comment
Google Posted December 3, 2007 Share Posted December 3, 2007 Im am currently using a Epson C90 printer with CISS setup.about one month ko n rin gamit ito. lately, nagkaproblema ako....nagpbabara ung mga nozzle heads nya.. good thing meron cleaning solution dito... will the cleaning solutions affect the printer heads?ganito b talaga pag compatible inks lang ang gamit mo? most likely the compatible ink that you are using is thicker than the original recommended or OEM ink by EPSON. The cleaning solution will not affect the printer head imho, but the pagbabara will. Quote Link to comment
izzecoh Posted December 3, 2007 Share Posted December 3, 2007 most likely the compatible ink that you are using is thicker than the original recommended or OEM ink by EPSON. The cleaning solution will not affect the printer head imho, but the pagbabara will. thanks... mahirap talaga gumamit ng mga alternative inks.... the cheaper the inks, the higher the maintenance... Quote Link to comment
Negz Posted December 4, 2007 Share Posted December 4, 2007 ummm.....i think Esc is not working..i pressed it so many times...still doesn't work.sir webmaster_ph...sorry but what what exactly is an airbrush??sir google... i'm considering it but do you think there's a good quality usb keyboard with affordable price....i'm quite short with my budget right now...where can i buy one?thanks! Quote Link to comment
webmaster_ph Posted December 4, 2007 Share Posted December 4, 2007 airbrush its compressed air sir google... i'm considering it but do you think there's a good quality usb keyboard with affordable price....i'm quite short with my budget right now...where can i buy one? buy @ cdr-king Quote Link to comment
Google Posted December 4, 2007 Share Posted December 4, 2007 airbrush is compressed air inside the can. attach a small nozzle dun sa spray and spray away. yes, buy at cdr-king. make sure the connector is USB, hindi PS2. Quote Link to comment
Negz Posted December 4, 2007 Share Posted December 4, 2007 thanks for the info...sir webmaster_ph and sir google....i'll try them Quote Link to comment
webmaster_ph Posted December 4, 2007 Share Posted December 4, 2007 how do i crimp a cable for use in a network? straight-through or twisted? do you recommend the use of patch panels? Quote Link to comment
Guest Leviticus Posted December 5, 2007 Share Posted December 5, 2007 how do i crimp a cable for use in a network? straight-through or twisted? do you recommend the use of patch panels?http://www.duxcw.com/digest/Howto/network/cable/cable8.htm better go with twisted. patch panels? exactly how many stations are you planning on putting up? kapag umabot ka na ng above 24 then it's time to put up a server cabinet. sa bagay.. maayos tignan ang may patch panel para hindi madapa dapa sa mga exposed cat-5 wire sa mga cubicles/computer stations Quote Link to comment
webmaster_ph Posted December 5, 2007 Share Posted December 5, 2007 better go with twisted. patch panels? exactly how many stations are you planning on putting up? kapag umabot ka na ng above 24 then it's time to put up a server cabinet. afaik, twisted is used for peer-to-peer. tama ba? Quote Link to comment
Guest Leviticus Posted December 5, 2007 Share Posted December 5, 2007 (edited) afaik, twisted is used for peer-to-peer. tama ba?cross-wire ang tamang term (different from twisted). it enables you to connect to another computer without using a hub Edited December 5, 2007 by Leviticus Quote Link to comment
blueboy Posted December 5, 2007 Share Posted December 5, 2007 ^ sad but true, bro. especially inks from cdr-king (ink-king). i've been a user of inkjet printers (mostly epson) for over 15yrs now, and one of the best tips i got from my suki in a refilling station is to alternate between original & 3rd-party inks. and on those instances that 3rd-party inks are installed, be sure to print regularly--ie, at least once a day--until all the ink is used up. Quote Link to comment
webmaster_ph Posted December 6, 2007 Share Posted December 6, 2007 cross-wire ang tamang term hahaha...oo nga pala. the terms got mixed up in my head. Quote Link to comment
JoB_LoW Posted December 6, 2007 Share Posted December 6, 2007 help naman kung paano maaalis yung funny UST scandal na virus? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.