Jump to content
  • Recently Browsing

    • No registered users viewing this page.

Free Legal Advice


Butsoy

Recommended Posts

wow.

i was thinking of something to say to console or just some advice that i can give tracie but my mind was totally blank.

 

it was a pretty good advice from freelicker. nice one pare...

 

to add to his advice, though not necessarily legal, as your case seems beyong legal, give the girl all the support she needs. be there. so when the times get hard, she wont sell you out. and in so doing you may tend to like her. when you need to marry her, i hope it'l turn out that you want to.

welcome to the club!

Link to comment

pardonme,

 

Nope, I'm not using advanced server. I'm just using XP Pro. I'm using the same user and password in all of the computers but the new computer can't "see" the shares nor the other computers but it can access the Internet through the server. :unsure:

 

bmikey69,

 

I tried to use a new network card as well but still no luck. :(

 

mikibijon,

 

Subkan ko yun. Medyo matrabaho nga lang pero kailangan e. :wizard:

 

I did a workaround so I could transfer files from the new computer to the others. I set up a simple FTP server on the new computer and accessed the files by typing its ip address in a web browser. This allowed me to access the files in the new computer. using Windows explorer. I wish I didn't have to do that tho. :D

Link to comment

i think sagittarius fits that position... inform ko sya about this...

ok.... i read something kaso nasa bahay yung URL yup...rated and actual speeds nga yun... pero sabi dun kahit ganun yung rating nang actual spped hindi naman affected talaga yung performance kasi less than .5 seconds lang nang yayari (actually microns nga yung ekek sa site eh) .. wala performance issue so don't worry about it...sa chip manufacturers daw nanggaling yung "bug" if u consider it a bug.

 

salamat bro... nacurious lang ako kc iba sa paningin eh... hehehe... TY ulit!!!

Link to comment

With the permission of sir butsoy, :)

 

freelicker, may force ka bang ginamit sa girl?

 

kung wala, we cannot consider the said act as rape. However, sa rape ka lang excuse mayroon pang iba.

 

Pero kung may force or intimidation ka ginamit, para makipagsex sa iyo yon girl or magkaroon ng sexual contact hehe rape na kagad yon.

 

Thank you po sir butsoy.

Link to comment
mga bro tell me if this is just a glitch or a normal occurrence...

 

my pc is a p4 1.6Ghz and if you try to look everywhere it will say so... from the bootup to the hardware device of the control panel and from other utilities...

 

the thing is if i right click on the "My Computer" icon and select the properties it sometimes displays conflicting speeds... like it will display

 

Mobile CPU 1.60GHz

1.20 GHz

512 MB of RAM

 

then doing the same procedure a minute or so after, it will display

 

Mobile CPU 1.60GHz

1.60Ghz

512 MB of RAM

 

i'm not really concerned about this, just being curious...

 

are these speeds the rated speed and actual speed (at the time of display) which is why it displays conflicting data???

ano specs nang PC mo like board, Bios, etc....

 

i'm using HP Omnibook XT6200

P4 @ 1.6Ghz

32mb video

512mb DDR

Phoenix Bios4 version6 (if i'm not mistaken)

ok.... looks like refresh setting lang yun pero dapat it shouldn't i suggest running some softwares like sisoft sandra to benchmark your system just to be sure.

 

pero i'm still trying to search sa web regarding this....so far wala pa akong nahahagilap eh so baka BIOS issue lang yan (refresh or display bug)

Its not an issue pre

Some poratables are configured designed to conserve energy so as to prolong battery life

In this case they tend to run themselves slower than the actual clockspeed

kya dalawa display nya

actual chack yun speed at the moment

kung hindi ginagamit lower than the actual max speed ng processor

okidok B)

Link to comment
Doc ... have u tried typing net view and net accounts on the command prompt?

 

please do and post here kung anong lumabas ... thanks! :P

>net view

System error 6118 has occurred.

 

The list of servers for this workgroup is not currently available

 

 

>net accounts

Force user logoff how long after time expires?: Never

Minimum password age (days): 0

Maximum password age (days): 42

Minimum password length: 0

Length of password history maintained: None

Lockout threshold: Never

Lockout duration (minutes): 30

Lockout observation window (minutes): 30

Computer role: WORKSTATION

The command completed successfully.

Link to comment
With the permission of sir butsoy, :)

 

freelicker, may force ka bang ginamit sa girl?

 

kung wala, we cannot consider the said act as rape. However, sa rape ka lang excuse mayroon pang iba.

 

Pero kung may force or intimidation ka ginamit, para makipagsex sa iyo yon girl or magkaroon ng sexual contact hehe rape na kagad yon.

 

Thank you po sir butsoy.

Actually, the definition of rape is having carnal knowledge (sex) with a woman against her will. It is normally done with force or intimidation, but not necessarily. You are correct in saying that if the girl was not forced to have sex, then there is no rape. Unfortunately, using force to have sex and having sex against the will of the girl are two different things. An example is when you have sex with a girl under the influence of drugs or alcohol. While the girl may not be resisting, its because you have taken her will to resist from her. This will still constitute as rape. Sometimes, girls who want to entrap a guy would say that the guy made her drink something to make her lose her inhibitions (ativan or something like that) and was able to succeed in having sex with her without her consent. This will be still be considered rape. To make matters worse, if a minor girl would make up a story against the guy, it has been shown that the court more often believes the girl over the guy. Thus, the danger of rape being likely to be pushed for.

 

I am not saying that the minor will actually make this point, but if she has a lawyer who is shrewd, it is most likely the angle that he will put forth before the court.

Link to comment
Somebody issued to me bounced cheque noong 1999 pa. Pwede pa bang idemanda? Meron bang prescribed period up to when a person could file a case? :)

In general, if the crime had already taken place as early as 1999, it is most likely that the crime had already prescribed and as such you could not file any more action against the offender. At most, you can file an ordinary action of collection of a sum of money, but not a criminal case. At least, with respect to the check that bounced on 1999.

Link to comment

doc, you can ping the server from the workstation, but the server cant ping the workstation? sure ba to? parang sa routing table na ng server mo ang me problem ah...

 

 

if it is not very sensitive naman, could you please issue this command at the DOS prompt of your server:

 

Route Print>C:\route.txt

 

and then copy and paste the contents of c:\route.txt here?

it since your server seems to have problems too.

 

1. Do you use your XPserver just to share internet connection?

2. Did you use any other 3rd party programs for sharing your connection? (e.g. wingate, winproxy, lanshare, etc)

3. Do you have router in your network? (e.g linsys print server/router)

 

Worse comes to worse, we may need to reconfigure your whole network to eliminate the problem and for easy adding of new hosts (workstations)

 

i will be monitoring this thread.

 

br.

da'Klesse

Edited by daklesse
Link to comment
doc, you can ping the server from the workstation, but the server cant ping the workstation? sure ba to? parang sa routing table na ng server mo ang me problem ah...

 

 

if it is not very sensitive naman, could you please issue this command at the DOS prompt of your server:

 

Route Print>C:\route.txt

 

and then copy and paste the contents of c:\route.txt here?

it since your server seems to have problems too.

 

1. Do you use your XPserver just to share internet connection?

2. Did you use any other 3rd party programs for sharing your connection? (e.g. wingate, winproxy, lanshare, etc)

3. Do you have router in your network? (e.g linsys print server/router)

 

Worse comes to worse, we may need to reconfigure your whole network to eliminate the problem and for easy adding of new hosts (workstations)

 

i will be monitoring this thread.

 

br.

da'Klesse

By all means. Here you go...

 

===========================================================================

Interface List

0x1 ........................... MS TCP Loopback interface

0x2 ...00 30 4f 1a 19 17 ...... Realtek RTL8139 Family PCI Fast Ethernet NIC - P

acket Scheduler Miniport

0x2e0004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface

===========================================================================

===========================================================================

Active Routes:

Network Destination Netmask Gateway Interface Metric

0.0.0.0 0.0.0.0 192.168.1.116 192.168.1.116 20

0.0.0.0 0.0.0.0 203.76.196.31 203.76.196.31 1

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1

192.168.1.0 255.255.255.0 192.168.1.116 192.168.1.116 20

192.168.1.116 255.255.255.255 127.0.0.1 127.0.0.1 20

192.168.1.255 255.255.255.255 192.168.1.116 192.168.1.116 20

202.81.160.116 255.255.255.255 203.76.196.31 203.76.196.31 1

203.76.196.31 255.255.255.255 127.0.0.1 127.0.0.1 50

203.76.196.255 255.255.255.255 203.76.196.31 203.76.196.31 50

224.0.0.0 240.0.0.0 192.168.1.116 192.168.1.116 20

224.0.0.0 240.0.0.0 203.76.196.31 203.76.196.31 1

255.255.255.255 255.255.255.255 192.168.1.116 192.168.1.116 1

Default Gateway: 203.76.196.31

===========================================================================

Persistent Routes:

None

 

 

I also use the XP server as a print server and I'm using 602Pro lansuite as my proxy server. I don't use any routers in the network. Hopefully when GlobeDSL is available in this building I will. :D

Link to comment
Guest Dobermaxx

Thanks to all the guys who posted replies to my problem. You were all right. My two memory dimms were incompatible. It ran fine when i used them one at a time but went to hell when both were installed. i upgraded to 2 256Mb DDR dimms and now everything is fine. thanks heaps guys.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...