Jump to content
  • Recently Browsing

    • No registered users viewing this page.

Free Legal Advice


Butsoy

Recommended Posts

A lot of the settings for your motherboards devices and interfaces can be found sa BIOS settings mo. You do not need to update your BIOS, and I advice you not to update by yourself if you haven't done so in the past. Kasi pag nagkamali ka ng pag update ng BIOS mo, di mo pwede i reset using CMOS battery. So better be careful. :)

 

Yeah I already scanned my BIOS and with the option "USB Controller Settings". It was in ENABLE mode so that means it will support both V1.1 and V2.0 right? Then how come there are no hi-speed ports then?

Link to comment
sana kung worthy cyang pakasalan e db? :P bigamy is for my husband, what im after is dun sa mga babaeng pumayag na magpakasal sa kanya. do we have a law for that???

Kung ang gusto mo po ay kasong kriminal (meaning, may parusang pagkakulong) laban sa dalawang babae, concubinage ang pwedeng isampang kaso. PERO dapat ay kasamang kasuhan ang asawa mo nito.

 

Gayunpaman, kahit mahatulan silang lahat na guilty, hindi pa rin makukulong yung dalawang babae dahil ang parusa para sa mga concubine ay destierro lang. (Sa destierro, ang parusa ay hindi pagkakakulong kundi pagbabawalan lamang ang kriminal na pumunta sa isang lugar; kunwari, sa teritoryo ng Makati).

 

Art. 87. Destierro. — Any person sentenced to destierro shall not be permitted to enter the place or places designated in the sentence, nor within the radius therein specified, which shall be not more than 250 and not less than 25 kilometers from the place designated. (Revised Penal Code)

Link to comment
Good day guys!

 

Tanong lang ako kung may alam kayo nabibilhan ng combo USB 2.0/Firewire PCI adapter or Firewire PCI adapter?

 

 

pls specify ang need mo for firewire.. almost all laptop /branded meron firewire... pang pc ba?? usb to firewire cable lang kailangan mo.. anyways you can always post pic ng need mo or just go to gilmore for actual demo

Link to comment
pls specify ang need mo for firewire.. almost all laptop /branded meron firewire... pang pc ba?? usb to firewire cable lang kailangan mo.. anyways you can always post pic ng need mo or just go to gilmore for actual demo

 

 

Thanks for the reply. Actually, I'm planning to get a digital camcorder. I wish to install a firewire port sa PC ko for video transfer and editing. Do you think ok na yung usb to firewire cable for this purpose?

Link to comment

I'll be upgrading my own pc since it's been 7 years since I last bought it.

 

It's an AMD Athlon XP 1500+ on an ECS K7S5A motherboard with 256 mb of ram, 40GB HD, CD-RW, DVD drive, 350w PSU.

 

 

I can still use my keyboard, my optical mouse, the CRT monitor, modem, and my soundblaster live! 5.1 soundcard, I guess.

 

What I'm looking for is a rig which would be used mostly for document production (projects for my son), a little video editing (I transfer some of my movies to my O2 so I can watch them during lunch breaks), and a little gaming. We're transferring PS2 games to our PS2 Hard disk so we can avoid damaging the DVDs so I'll need one IDE connector on the motherboard. The problem now is, I'm no longer familiar with the components so can you guys pls help me with this set-up I planned? Are the components compatible, and will they fulfill the above requisites?

 

 

Thanks in advance!!

 

PC Quotation

ItemPrice

Total Price:P 18,130.00

Processor:

AMD Athlon 64 X2 3600+ AM2 2000Mhz P 3,800.00

Motherboard:

MSI K9VGM-V A/V/L/DDR2/SATA/PCI-E P 2,800.00

Hard disk:

160 GB Seagate 7200rpm SATA NCQ (2-yr wty)2,750.00

RAM:

1GB DDR2 533 PQI (2-yr wty) P 2,200.00

Video card:

Gecube X1550 HM DDR2 256MB 128Bit P 2,800.00

Optical Drive:

LG DVD-Writer 20x GSA-H55N Black P 1,800.00

Casing:

Frontier Luster LU09A 500W/KB Black P 1,980.00

 

My budget was supposed to be P15,000. As you can see, I'm way overbudget... Which of the above components can I downgrade a little so I can still reach my 15k limit?

Link to comment
I'll be upgrading my own pc since it's been 7 years since I last bought it.

 

It's an AMD Athlon XP 1500+ on an ECS K7S5A motherboard with 256 mb of ram, 40GB HD, CD-RW, DVD drive, 350w PSU.

I can still use my keyboard, my optical mouse, the CRT monitor, modem, and my soundblaster live! 5.1 soundcard, I guess.

 

What I'm looking for is a rig which would be used mostly for document production (projects for my son), a little video editing (I transfer some of my movies to my O2 so I can watch them during lunch breaks), and a little gaming. We're transferring PS2 games to our PS2 Hard disk so we can avoid damaging the DVDs so I'll need one IDE connector on the motherboard. The problem now is, I'm no longer familiar with the components so can you guys pls help me with this set-up I planned? Are the components compatible, and will they fulfill the above requisites?

Thanks in advance!!

 

PC Quotation

ItemPrice

Total Price:P 18,130.00

Processor:

AMD Athlon 64 X2 3600+ AM2 2000Mhz P 3,800.00

Motherboard:

MSI K9VGM-V A/V/L/DDR2/SATA/PCI-E P 2,800.00

Hard disk:

160 GB Seagate 7200rpm SATA NCQ (2-yr wty)2,750.00

RAM:

1GB DDR2 533 PQI (2-yr wty) P 2,200.00

Video card:

Gecube X1550 HM DDR2 256MB 128Bit P 2,800.00

Optical Drive:

LG DVD-Writer 20x GSA-H55N Black P 1,800.00

Casing:

Frontier Luster LU09A 500W/KB Black P 1,980.00

 

My budget was supposed to be P15,000. As you can see, I'm way overbudget... Which of the above components can I downgrade a little so I can still reach my 15k limit?

 

If you have relatives abroad, particularly in the US, you can get a better system with your budget. The only minus side to this is it has to be shipped back to you which can be another expense.

Link to comment
I'll be upgrading my own pc since it's been 7 years since I last bought it.

 

It's an AMD Athlon XP 1500+ on an ECS K7S5A motherboard with 256 mb of ram, 40GB HD, CD-RW, DVD drive, 350w PSU.

I can still use my keyboard, my optical mouse, the CRT monitor, modem, and my soundblaster live! 5.1 soundcard, I guess.

 

What I'm looking for is a rig which would be used mostly for document production (projects for my son), a little video editing (I transfer some of my movies to my O2 so I can watch them during lunch breaks), and a little gaming. We're transferring PS2 games to our PS2 Hard disk so we can avoid damaging the DVDs so I'll need one IDE connector on the motherboard. The problem now is, I'm no longer familiar with the components so can you guys pls help me with this set-up I planned? Are the components compatible, and will they fulfill the above requisites?

Thanks in advance!!

 

PC Quotation

ItemPrice

Total Price:P 18,130.00

Processor:

AMD Athlon 64 X2 3600+ AM2 2000Mhz P 3,800.00

Motherboard:

MSI K9VGM-V A/V/L/DDR2/SATA/PCI-E P 2,800.00

Hard disk:

160 GB Seagate 7200rpm SATA NCQ (2-yr wty)2,750.00

RAM:

1GB DDR2 533 PQI (2-yr wty) P 2,200.00

Video card:

Gecube X1550 HM DDR2 256MB 128Bit P 2,800.00

Optical Drive:

LG DVD-Writer 20x GSA-H55N Black P 1,800.00

Casing:

Frontier Luster LU09A 500W/KB Black P 1,980.00

 

My budget was supposed to be P15,000. As you can see, I'm way overbudget... Which of the above components can I downgrade a little so I can still reach my 15k limit?

 

my suggestions...

 

1. try to halve your DASD. since you can still use your old DASD, if you halve your project, you will still have 80+40GB = 120GB.. still big. of course, should you need to install or require additional space in the future, you can always buy one or get an external based one.

2. initially get a board with integrated video card. i think most mobos today integrate a 256 MB video card. you may postpone getting the 1 GB one, in the future if you have the budget.

3. i think there are cheaper casings around than that.

4. if you really don't need a DVD writer now, then recycle your DVD and CD-ROM drive.

 

imho.

Link to comment

No need to update BIOS, just install or update your usb controllers using motherboard's driver disc. Your device manager should have "enhanced USB root hub" in universal serial bus controllers category. Another thing, assuming you are using Windows XP, your motherboard should using it's own provided drivers and not using win xp provided drivers.

 

If you still want to update your bios, no problem, just use MSI live update which is included in driver disc. It will the do the updating automatically, just follow the procedures and read the warnings. In the BIOS flashing procedure, the instability of the PSU Power Supply Unit, power failure or other operating errors might result in the process failure which makes the system fail to re-boot. In other words, you just erased or cooked your chipset.

 

You will need to have and internet connection for this utility to download the latest drivers. Before you update your bios, take note of the settings cause after update, all settings will be in "default" thereby affecting system performance.

 

Some USB 2.0 devices also has incompatibility issues with USB 2.0 ports.

 

Guys tanong lang regarding with my motherboard which is MSI K8N Neo4 F Socket 939... According to the manufacturer's specifications, it supports both USB 1.1 and USB 2.0. But, tuwing nagpplug in ako ng HI-SPEED device, lagi padin siyang nagpprompt na "This device will work faster on a USB2.0 port" something like that. And when I view the available ports for my PC, it says na there are no HI-SPEED USB ports sa computer ko. Paano ko maayos to?

 

One friend told me na iupdate ko daw BIOS. Any other steps? Kapag nagkamale ka ng update ng BIOS mo diba pwede naman ireset yung CMOS Battery tama ba?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...