riv123 Posted July 28, 2008 Share Posted July 28, 2008 Hello everyone, wala kasi akong makitang topic regarding specifically para sa mga routers so nag-start ako ng isa. Anyways, problem agad na alam ko maraming masters dito na mas marunong kesa sa akin, so here goes: me idea ba kayo kung paano ma-revive isang bricked router? router ko is Linksys WRT54G v7 CHEERS!!! Quote Link to comment
silver41surfer Posted July 28, 2008 Share Posted July 28, 2008 Same here. kaka-set-up ko lng ng router ko last saturday Quote Link to comment
riv123 Posted July 28, 2008 Author Share Posted July 28, 2008 Same here. kaka-set-up ko lng ng router ko last saturday So your router is working? CHEERS!!! Quote Link to comment
riv123 Posted July 28, 2008 Author Share Posted July 28, 2008 (edited) to answer my question: http://linksys.custhelp.com/cgi-bin/linksy...d=5750625002B18 only problem it says use wind0$e, masubukan nga sa linux... hope this thread will grow as the title says... CHEERS!!! Edited July 28, 2008 by riv123 Quote Link to comment
silver41surfer Posted July 28, 2008 Share Posted July 28, 2008 So your router is working? CHEERS!!! Yep..actually 2 units lng ang connected sa Router. a desktop PC w/c using networking cable and a Laptop with a wireless connection... Im just experimenting and applying my knowledge in learn in my training. good thing gumana naman...hahahaha! Quote Link to comment
riv123 Posted July 28, 2008 Author Share Posted July 28, 2008 Yep..actually 2 units lng ang connected sa Router. a desktop PC w/c using networking cable and a Laptop with a wireless connection... Im just experimenting and applying my knowledge in learn in my training. good thing gumana naman...hahahaha! good to hear that... ano router mo? linksys v7? CHEERS!!! Quote Link to comment
silver41surfer Posted July 28, 2008 Share Posted July 28, 2008 good to hear that... ano router mo? linksys v7? CHEERS!!! Im not sure kung anong version sya pro the same Model you've mentioned. Btw, if i have any inquiry about networking stuff I consult master SP01 under CCNA thread... hehehe! Quote Link to comment
riv123 Posted July 28, 2008 Author Share Posted July 28, 2008 Im not sure kung anong version sya pro the same Model you've mentioned. Btw, if i have any inquiry about networking stuff I consult master SP01 under CCNA thread... hehehe! most probably i will, but what i have in mind is the hardware part of routers and it's possible hacks :thumbsupsmiley: Quote Link to comment
diggnation Posted October 18, 2008 Share Posted October 18, 2008 panong bricked? flash mo yung firmware.. go to the linksys webpage im sure they have a FAQ there or tutorial Quote Link to comment
jedimaster Posted October 19, 2008 Share Posted October 19, 2008 How does one set up router home-based, say 7 computers, mix of windows NT and XP OS, ethernet broadband. Thanks. Quote Link to comment
Guest Leviticus Posted October 20, 2008 Share Posted October 20, 2008 hello. routers eh so ask ko dito.. anybody have any experience with load balancers? balak ko magkabit sa office pero ang problem ko ay ang mga voip phones. magagamit ko pa rin ba ang mga voip phones kahit naka-load balancer ako? kukunin ko yung tplink 2wan-3lan load balancer nila. any info is appreciated :thumbsupsmiley: Quote Link to comment
crunchy_blac666 Posted October 21, 2008 Share Posted October 21, 2008 mga brad question lang... for example setup ko is: - Modem (Single port)----> 1WAN 4LAN ROUTER ----> Switch- I have 666.666.666.10/29 IP Block, so meaning may 5 usable IPs ako. - what if i-set ko as NAT yung router ko? lahat ba nung 4 LAN PORT ng Router ko is naka NAT na? or pwedeng 1 Port lang ang naka NAT then ung 3 remaining ports magbibigay ng PUBLIC IP? kasi kung lahat ng 4 PORTS ng router ay naka NAT na, sayang yung iba kong Public IPs... TIA Quote Link to comment
Google Posted November 11, 2008 Share Posted November 11, 2008 How does one set up router home-based, say 7 computers, mix of windows NT and XP OS, ethernet broadband. Thanks. just put it on DHCP and connect your computers in it. Quote Link to comment
bobby_drake Posted November 19, 2008 Share Posted November 19, 2008 mga brad question lang... for example setup ko is: - Modem (Single port)----> 1WAN 4LAN ROUTER ----> Switch- I have 666.666.666.10/29 IP Block, so meaning may 5 usable IPs ako. - what if i-set ko as NAT yung router ko? lahat ba nung 4 LAN PORT ng Router ko is naka NAT na? or pwedeng 1 Port lang ang naka NAT then ung 3 remaining ports magbibigay ng PUBLIC IP? kasi kung lahat ng 4 PORTS ng router ay naka NAT na, sayang yung iba kong Public IPs... TIA a /29 gives you 8 IP's, (1 network, 6 hosts and 1 broadcast), question is ito ba talaga ang naka alot sayong IP? normally 1 ip lng binibigay ng ISP. Anyway in case that this is the range your ISP gave to you bakit ka pa mag NAT, you got 6 available IP's that can be routed in public INTERNET. In case you need to add up more than what you have (7++ PC's) then you could start using NAT either 1 is to one translation or better the PAT where all terminals use the same ip as you specify, but identification will come from the port numbers. hope it helps Quote Link to comment
Anubis13 Posted January 14, 2009 Share Posted January 14, 2009 mga brad question lang... for example setup ko is: - Modem (Single port)----> 1WAN 4LAN ROUTER ----> Switch- I have 666.666.666.10/29 IP Block, so meaning may 5 usable IPs ako. - what if i-set ko as NAT yung router ko? lahat ba nung 4 LAN PORT ng Router ko is naka NAT na? or pwedeng 1 Port lang ang naka NAT then ung 3 remaining ports magbibigay ng PUBLIC IP? kasi kung lahat ng 4 PORTS ng router ay naka NAT na, sayang yung iba kong Public IPs... TIA so ang gusto mo mangyari, meron kang NAT-ed lan sa 1 public ip at 4 pc na may public ip? well in that case ganito dapat ang set up mo: MODEM-->5 port switch-->1WAN 4LANRouter--->NAT-ed computers |-->PC w/public IP |-->PC w/public IP |-->PC w/public IP |-->PC w/public IP at oo lahat ng ports ng soho routers ay NAT-ed unless lagay mo sa dmz ung IP or port(kung my option na ganun) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.