AlteredNeo Posted January 16, 2006 Share Posted January 16, 2006 re: Hiren's Bootcd 7.6.iso (58.2MB) do you just burn the folders into a bootable CD or uncompress each *.uhu files THEN burn them to CD? anyone with detailed instruction would be appreciated Quote Link to comment
momo_aswang Posted January 16, 2006 Share Posted January 16, 2006 re: Hiren's Bootcd 7.6.iso (58.2MB) do you just burn the folders into a bootable CD or uncompress each *.uhu files THEN burn them to CD? anyone with detailed instruction would be appreciated<{POST_SNAPBACK}> pag ISO po yata pwede nang iburn yan through nero sya na mag uuncompress nung image file. hehehe.... Tama kaya? ay ewan. Quote Link to comment
luminousblack Posted January 17, 2006 Author Share Posted January 17, 2006 correct just burn the image file into the cd... Quote Link to comment
AlteredNeo Posted January 17, 2006 Share Posted January 17, 2006 i see, sorry, didn't notice that it was an *.ISO file. when i double clicked it kasi winrar automatically opened the *.ISO file and if it was a folder. sorry again yup just burn to *.ISO to CD, thanks! Quote Link to comment
doctor_ni_tequila Posted January 17, 2006 Share Posted January 17, 2006 i have a poblem with my notebook....nag blue screen siya pag nag install ako ng bagong os..... may service center ba ng gateway ba d2 sa pinas? Quote Link to comment
momo_aswang Posted January 17, 2006 Share Posted January 17, 2006 i have a poblem with my notebook....nag blue screen siya pag nag install ako ng bagong os..... may service center ba ng gateway ba d2 sa pinas?<{POST_SNAPBACK}>Sir san nyo po nabili yang gateway laptop baka alam nung napagbilhan nyo. Dami po sir gumagawa nang mga laptop d2 sa pinas kahit dina sa mismong service center lalo na kung out of warranty na. Yung problema po nang laptop nyo might be incompatibility problems lang, Update nang BIOS, drivers or Memory na may tama. Pag lumang OS po ba ininstall alang blue screen? Quote Link to comment
deus Posted January 22, 2006 Share Posted January 22, 2006 i have a poblem with my notebook....nag blue screen siya pag nag install ako ng bagong os..... may service center ba ng gateway ba d2 sa pinas?<{POST_SNAPBACK}> 1. Where/when during installation did the blue screen appears?2. Hard drive, RAM and VGA Specs?3. Previous OS used and new OS for installation? :headsetsmiley: Quote Link to comment
imijin Posted January 23, 2006 Share Posted January 23, 2006 Laptops come with an OS cd(most of them, well it depends sa brand)....try to find the CD and use it to re install.... it could be incompatibity problem.. Quote Link to comment
momo_aswang Posted January 26, 2006 Share Posted January 26, 2006 Laptops come with an OS cd(most of them, well it depends sa brand)....try to find the CD and use it to re install.... it could be incompatibity problem..<{POST_SNAPBACK}> Onga baka may laptop-user incompatibilities lang sila ..... hehehe! Quote Link to comment
blitzz127 Posted January 26, 2006 Share Posted January 26, 2006 kung may system recovery CD, better re-install mo n lng yung original n OS then from there, try to trace the problem. Quote Link to comment
greg8tan Posted January 30, 2006 Share Posted January 30, 2006 Hi! I am having problems with my LiteOn DVD burner...I use Nero to burn my DVDs. Anyway, when i burn a DVD, it says that it is successful but when i check out the burnt dvd, i cant read or play any files. The funny thing is that when i burn CDs ... its ok and i can open all the files on the CD.Do i have to change my DVD burner? or is it my Burner Software?Pls help me with this problem...Thanks! :cool: :mtc: Quote Link to comment
deus Posted January 30, 2006 Share Posted January 30, 2006 Hi! I am having problems with my LiteOn DVD burner...I use Nero to burn my DVDs. Anyway, when i burn a DVD, it says that it is successful but when i check out the burnt dvd, i cant read or play any files. The funny thing is that when i burn CDs ... its ok and i can open all the files on the CD.Do i have to change my DVD burner? or is it my Burner Software?Pls help me with this problem...Thanks! :cool: :mtc:<{POST_SNAPBACK}> If its a video you're burning, media should be DVD+R/DVD+RWTry to remove and reinstall the application and see if it would work fine.You can also try to read some DVD movies using your writer and see if it can still read it. Quote Link to comment
greg8tan Posted January 31, 2006 Share Posted January 31, 2006 If its a video you're burning, media should be DVD+R/DVD+RWTry to remove and reinstall the application and see if it would work fine.You can also try to read some DVD movies using your writer and see if it can still read it.<{POST_SNAPBACK}> Thanks for your help...i will try doing what you said. :cool: Quote Link to comment
dc_maker1009 Posted February 2, 2006 Share Posted February 2, 2006 need help guys... i dual-installed ubuntu 5.04 and XP unto my laptop (different partitions), i uninstalled ubuntu for the meantime while waiting for my new ubuntu 5.1 cd to arrive, now, everytime my system boots, somehow, it shows 2 windows xp installation, and i need to select pa which to boot into (both of them works naman), any way to remove this? kasi single install lang naman XP ko, hassle kasi, either you wait 30 secs to boot, or press enter pa... thanks... Quote Link to comment
momo_aswang Posted February 2, 2006 Share Posted February 2, 2006 need help guys... i dual-installed ubuntu 5.04 and XP unto my laptop (different partitions), i uninstalled ubuntu for the meantime while waiting for my new ubuntu 5.1 cd to arrive, now, everytime my system boots, somehow, it shows 2 windows xp installation, and i need to select pa which to boot into (both of them works naman), any way to remove this? kasi single install lang naman XP ko, hassle kasi, either you wait 30 secs to boot, or press enter pa... thanks...<{POST_SNAPBACK}> Tingnan nyo po sir yung BOOT.INI ...... run nyo msconfig tapos edit nyo boot.ini alam nyo na gagawin dun. Tingnan nyo kung dun nga. hehehee. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.