legal Free Legal Advice

[dgr81]

thanks nag reformat na ako wala parin choppy pa rin maybe because of the utorrent that is running. try ko nalang advice nyo

[between_angels]

mga sir regarding ulit sa credit card. the case was already filed sa makati rtc. and meron criminal case na violation or RA 8484, defrauding of creditors

 

any one familiar with this one?

[hitomi]

hi computer experts!

 

i have a problem with one of my pc's hard disks

when the computer is turned on, it executes the S.M.A.R.T.

command on both my hard drives, one is ok but the other one fails.

then it says press f1 to continue, i do so

then the computer operates normally, i can access the "failed" hard drive.

 

what is the S.M.A.R.T. command?

what is wrong with the failed hard drive?

how do i fix it?

 

btw, my pc is a p4, has 1 gig of ram and runs MS XP

 

please help, am afraid one day i'd lose all my data on that hard drive.

(backed it up just in case)

 

thank u!

[Dr_PepPeR]

My apologies, one bad habit i got from the office. :mtc:

 

So sorry, I didn't mean anything. We have our own stupid acronyms in the banking industry. I always try to remember that not everyone speaks our language.

[rocco69]

Thanks 'agentjackbauer' for shedding some light. So is it safe to say na 4-6 mos from the date of submission ung possible duration ng kaso (that is kung walang counter affidavit)?

 

Much thanks :mtc:

 

The period 4-6 months would cover only the preliminary investigation by the fiscal. That is, this is period for the fiscal to determine whether or not a crime has probably been committed. If he finds ity is so, he will then file the case in court. The case filed in court could take a year (hopefully) or more to resolve. However, this case is covered by summary procedure so the period should be shorter than for ordinary criminal cases. Ganyan talaga pag nagkakaso, matagal din, due in part to the number of cases pending with the courts (it has been estimated that in the Metro Manila area, MTCs on the average have a backlog of 2,000 to 3,000 cases each).

[Guest Leviticus]

hi computer experts!

 

i have a problem with one of my pc's hard disks

when the computer is turned on, it executes the S.M.A.R.T.

command on both my hard drives, one is ok but the other one fails.

then it says press f1 to continue, i do so

then the computer operates normally, i can access the "failed" hard drive.

 

what is the S.M.A.R.T. command?

what is wrong with the failed hard drive?

how do i fix it?

 

btw, my pc is a p4, has 1 gig of ram and runs MS XP

 

please help, am afraid one day i'd lose all my data on that hard drive.

(backed it up just in case)

 

thank u!

A little guesswork lang:

 

I am assuming that you have just recently added your second hard disc. ARe you using a 915 motherboard? you can eliminate the need to "press F1 to continue" by going to your cmos/bios and adjust your settings, most probably your BOOT settings. In addition, just check your advanced settings of your IDE hardware and see if correct ang mga settings (when in doubt, just choose "auto detect")

 

just post here if this doesn't work. as I said a few guesswork is involved.

 

[_Pabling]

hi computer experts!

 

i have a problem with one of my pc's hard disks

when the computer is turned on, it executes the S.M.A.R.T.

command on both my hard drives, one is ok but the other one fails.

then it says press f1 to continue, i do so

then the computer operates normally, i can access the "failed" hard drive.

 

what is the S.M.A.R.T. command?

what is wrong with the failed hard drive?

how do i fix it?

 

btw, my pc is a p4, has 1 gig of ram and runs MS XP

 

please help, am afraid one day i'd lose all my data on that hard drive.

(backed it up just in case)

 

thank u!

 

try downloading a HDD diagnostics utility para ma check mo integrity ng HDDs mo. Bka kc palyado na.

[hitomi]

A little guesswork lang:

 

I am assuming that you have just recently added your second hard disc. ARe you using a 915 motherboard? you can eliminate the need to "press F1 to continue" by going to your cmos/bios and adjust your settings, most probably your BOOT settings. In addition, just check your advanced settings of your IDE hardware and see if correct ang mga settings (when in doubt, just choose "auto detect")

 

just post here if this doesn't work. as I said a few guesswork is involved.

 

 

no sir, i specified it when the PC was being assembled.

that error just popped up recently, about three weeks ago.

my motherboard is an ECS P4M800-M7, LGA775 socket

but i will try what you said sir, thank u

 

try downloading a HDD diagnostics utility para ma check mo integrity ng HDDs mo. Bka kc palyado na.

 

will also try this, thanks :cool:

[Guest Leviticus]

no sir, i specified it when the PC was being assembled.

that error just popped up recently, about three weeks ago.

my motherboard is an ECS P4M800-M7, LGA775 socket

but i will try what you said sir, thank u

will also try this, thanks :cool:

Try changing your IDE cable. Either natamaan ng fluctuation yan or nainitan. Medyo may pagkamaselan kasi ng IDE cables.

 

Also, try switching the IDE cables around between the CD drive and your hard disc. Sometimes it is not advisable if two hard discs are connected by one IDE cable (master-slave).

 

Hehe... in addition, change your mobo. ECS is not a very good brand :thumbsdownsmiley:

[_Pabling]

So sorry, I didn't mean anything. We have our own stupid acronyms in the banking industry. I always try to remember that not everyone speaks our language.

 

no harm done. point taken.

 

The period 4-6 months would cover only the preliminary investigation by the fiscal. That is, this is period for the fiscal to determine whether or not a crime has probably been committed. If he finds ity is so, he will then file the case in court. The case filed in court could take a year (hopefully) or more to resolve. However, this case is covered by summary procedure so the period should be shorter than for ordinary criminal cases. Ganyan talaga pag nagkakaso, matagal din, due in part to the number of cases pending with the courts (it has been estimated that in the Metro Manila area, MTCs on the average have a backlog of 2,000 to 3,000 cases each).

 

shucks. ang tagal pala. :cry:

[zeromike22]

@ zeromike22

 

What might the file format be?

 

@ dgr81

 

well, a lot of laptop has 256mb and winxp sp2 (256 min; 512 above recommended) installed and does not have that kind of problem.

 

anyway, try to:

 

1. update your graphics card driver

2. defrag your hard drive

3. increase the virtual memory (control panel-system-advanced-

performance "settings"-advanced-virtual memory "change") to Initial:

512MB and Maximum 768-1024 (depending on your free storage

space).

4. Adjust the visual effects to "best performance" (control panel-system-

advanced-performance "settings"-visual effects).

5. Shutdown virus scanner and firewall and anything that is in the

system tray (these tends to bloat the system) that is not important

before launching media player.

6. Do registry tweak (need to know basis)

 

 

thanks for the concern pre.. i've solve my own problem by burning my downloaded file into a cd.....

 

anybody here using utorrent?? if so how do i configure port settings for this torrent downloader?? just recently na experience ko na red yung status bar niya instead of green... message says "a firewall/router is limititng your network traffic, you need to open up a port so others can open up toy you" what do this mean????

[hitomi]

Try changing your IDE cable. Either natamaan ng fluctuation yan or nainitan. Medyo may pagkamaselan kasi ng IDE cables.

 

Also, try switching the IDE cables around between the CD drive and your hard disc. Sometimes it is not advisable if two hard discs are connected by one IDE cable (master-slave).

 

Hehe... in addition, change your mobo. ECS is not a very good brand :thumbsdownsmiley:

 

hehe oo nga e, i think i heard you say that in a different thread ~too late~

 

anyway, checked the BIOS and its on autodetect. will try the cable switch.

 

so if i have two hard discs, its better to use two cables? primary master and secondary master?

how do i do that set-up?

 

thanks sir :cool: :mtc:

[Guest Leviticus]

hehe oo nga e, i think i heard you say that in a different thread ~too late~

 

anyway, checked the BIOS and its on autodetect. will try the cable switch.

 

so if i have two hard discs, its better to use two cables? primary master and secondary master?

how do i do that set-up?

 

thanks sir :cool: :mtc:

If you open up your CPU and look at your IDE cable there should be 2 slots... where your primary hard disk is the slot for IDE0, and the other is IDE1 (or IDE1 and IDE2, primary and secondary; it depends on the mobo and how they label it). Do you know how to switch jumpers in your hard disks and CD drive? usually there are pictures in the labels of the hard disk indicating where you should place the jumper.

 

A good configuration would be:

in primary IDE: primary master (hard disk) and primary slave (CD drive)

secondary IDE: primary master (hard disk)

 

Just set your second hard disk's jumper to "master" and attach it to the secondary IDE cable

[hitomi]

If you open up your CPU and look at your IDE cable there should be 2 slots... where your primary hard disk is the slot for IDE0, and the other is IDE1 (or IDE1 and IDE2, primary and secondary; it depends on the mobo and how they label it). Do you know how to switch jumpers in your hard disks and CD drive? usually there are pictures in the labels of the hard disk indicating where you should place the jumper.

 

A good configuration would be:

in primary IDE: primary master (hard disk) and primary slave (CD drive)

secondary IDE: primary master (hard disk)

 

Just set your second hard disk's jumper to "master" and attach it to the secondary IDE cable

 

thanks sir, will try to do that :cool: :mtc:

 

anyway, brought the pc to the store yesterday, they disabled the SMART command. (whatever that is)

the error doesn't show anymore but am wondering if disabling it is just curing the symptom, not the cause.

 

but i will still do the cable switch because the cd drive is acting up.

 

it just autoruns any cd. it won't browse or explore.

we have extra cd drives at home and we've replaced it three times already

because we're thinking its the drive but it isn't.

same thing happens whatever cd drive we put in. help!

 

~grrrrrrr~

[tripmate]

Murder per Revised Penal Code is killing another person with the concurrence of any of the following circumstances:

 

1. With treachery, taking advantage of superior strength, with the aid of armed men, or employing means to weaken the defense or of means or persons to insure or afford impunity.

2. In consideration of a price, reward, or promise.

 

3. By means of inundation, fire, poison, explosion, shipwreck, stranding of a vessel, derailment or assault upon a street car or locomotive, fall of an airship, by means of motor vehicles, or with the use of any other means involving great waste and ruin.

 

4. On occasion of any of the calamities enumerated in the preceding paragraph, or of an earthquake, eruption of a volcano, destructive cyclone, epidemic or other public calamity.

 

5. With evident premeditation.

 

6. With cruelty, by deliberately and inhumanly augmenting the suffering of the victim, or outraging or scoffing at his person or corpse.

 

Homicide is killing another person without the above attendant circumstances.

 

just to follow up po... so malamang murder nga yung case ng dad ko?? kasi he was shot unarmed and nakatalikod pa kasi tumtakbo na cya palayo.... then alam ko tinamaan na cya nung 2nd shot binaril pa din cya.... also ask ko din kasi yung case sa province pa namin yun, is it possible na malipat yung case dito sa manila??