Computer Troubleshooting And Repair

[Arneeious]

This is definitely a hardware problem. Either a motherboard or power supply problem or a power button (front i/o panel). Disconnect your avr, reseat the power connectors from the motherboard. plug in the avr then turn it on. Check if your computer still turns on automatically. If it still does the same thing might consider replacing the PSU - check as well the power button or your mobo might be short circuited.

 

Try uninstalling it using REVO uninstaller or Windows Clean UP utility. Try running malwarebytes to check for spyware.

 

Thank you very much for the advice.

[gagambingi]

Bros, tanong lang po. Bakit nagrerestart ung pc pag nagsasaksak ako sa USB? :unsure:

 

Nagtry kana ba gumamit ng ibang usb stick? If same problem, try the other usb port para ma isolate mo agad, if same pa din, try to install repair option.

[SamanthaJones]

No more issues???? damn i miss this thread

[bogchi90210]

Beep Codes Error Codes

Some useful information .

 

Standard Original IBM POST Error Codes

Code Description

 

1 short beep System is OK

2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem

1 long, 1 short beep System board problem

1 long, 2 short beeps Display adapter problem (MDA, CGA)

1 long, 3 short beeps Display adapter problem (EGA)

3 long beeps 3270 keyboard card

IBM POST Diagnostic Code Descriptions

Code Description

100 - 199 System Board

200 - 299 Memory

300 - 399 Keyboard

400 - 499 Monochrome Display

500 - 599 Colour/Graphics Display

600 - 699 Floppy-disk drive and/or Adapter

700 - 799 Math Coprocessor

900 - 999 Parallel Printer Port

1000 - 1099 Alternate Printer Adapter

1100 - 1299 Asynchronous Communication Device, Adapter, or Port

1300 - 1399 Game Port

1400 - 1499 Colour/Graphics Printer

1500 - 1599 Synchronous Communication Device, Adapter, or Port

1700 - 1799 Hard Drive and/or Adapter

1800 - 1899 Expansion Unit (XT)

2000 - 2199 Bisynchronous Communication Adapter

2400 - 2599 EGA system-board Video (MCA)

3000 - 3199 LAN Adapter

4800 - 4999 Internal Modem

7000 - 7099 Phoenix BIOS Chips

7300 - 7399 3.5" Disk Drive

8900 - 8999 MIDI Adapter

11200 - 11299 SCSI Adapter

21000 - 21099 SCSI Fixed Disk and Controller

21500 - 21599 SCSI CD-ROM System

 

AMI BIOS Beep Codes

Code Description

 

1 Short Beep System OK

2 Short Beeps Parity error in the first 64 KB of memory

3 Short Beeps Memory failure in the first 64 KB

4 Short Beeps Memory failure in the first 64 KB Operational of memory

or Timer 1 on the motherboard is not functioning

5 Short Beeps The CPU on the motherboard generated an error

6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode

7 Short Beeps The CPU generated an exception interrupt

8 Short Beeps The system video adapter is either missing, or its memory is faulty

9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS

10 Short Beeps The shutdown register for CMOS RAM failed

11 Short Beeps The external cache is faulty

1 Long, 3 Short Beeps Memory Problems

1 Long, 8 Short Beeps Video Card Problems

 

Phoenix BIOS Beep Codes

Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

 

Code Description

1-1-3 CMOS read/write failure

1-1-4 ROM BIOS checksum error

1-2-1 Programmable interval timer failure

1-2-2 DMA initialisation failure

1-2-3 DMA page register read/write failure

1-3-1 RAM refresh verification failure

1-3-3 First 64k RAM chip or data line failure

1-3-4 First 64k RAM odd/even logic failure

1-4-1 Address line failure first 64k RAM

1-4-2 Parity failure first 64k RAM

2-_-_ Faulty Memory

3-1-_ Faulty Motherboard

3-2-4 Keyboard controller Test failure

3-3-4 Screen initialisation failure

3-4-1 Screen retrace test failure

3-4-2 Search for video ROM in progress

4-2-1 Timer tick interrupt in progress or failure

4-2-2 Shutdown test in progress or failure

4-2-3 Gate A20 failure

4-2-4 Unexpected interrupt in protected mode

4-3-1 RAM test in progress or failure>ffffh

4-3-2 Faulty Motherboard

4-3-3 Interval timer channel 2 test or failure

4-3-4 Time of Day clock test failure

4-4-1 Serial port test or failure

4-4-2 Parallel port test or failure

4-4-3 Math coprocessor test or failure

Low 1-1-2 System Board select failure

Low 1-1-3 Extended CMOS RAM failure

 

gumagana ba to sa lahat ng motherboards ?

[MitchCadiz]

not all... refer to your mobo manual

[SamanthaJones]

not all... refer to your mobo manual

 

i agree..

[wizard23]

is there a way to convert read-only powerpoint files to open office presentation files? i don't have windows office files kasi

in my laptop. need to convert these powerpoint files to open office for presentation purposes. thanks in advance for the advice.

[SamanthaJones]

is there a way to convert read-only powerpoint files to open office presentation files? i don't have windows office files kasi

in my laptop. need to convert these powerpoint files to open office for presentation purposes. thanks in advance for the advice.

click on this link >>> http://www.freefileconvert.com/

Edited May 19, 2010 by SamanthaJones

[wizard23]

^ thanks samantha jones!

[chewie]

hi guys, am trying to setup a linksys wireless router at home. kaso lang when am going through the startup setup process, nag error 311 and asking me to enable my wired network adapter. i've tried to change the ethernet properties, but to no avail. please help! TIA

[polofalltrades]

What Router are you using? Let Me guess, Linksys WRT54G2? Did you use the CD that came with the package contents?

Edited May 26, 2010 by polofalltrades

[chewie]

What Router are you using? Let Me guess, Linksys WRT54G2? Did you use the CD that came with the package contents?

 

oh sorry it's not, i have a WRT320N. yup, ran the CD first, but on the checking network connections, that error popped out. tried other bypass solutions that i found in other forums, but nothing.

[SamanthaJones]

oh sorry it's not, i have a WRT320N. yup, ran the CD first, but on the checking network connections, that error popped out. tried other bypass solutions that i found in other forums, but nothing.

 

are you installing in windows xp, vista or windows 7? if you're using vista or 7 try opening the installation folder, look for the setup.exe file right click then select run as administrator

[wizard23]

im using google chrome. lately napansin ko bigla na lang nawawala ang browser so i have to start it again.

then sometimes. na reredirect sa multiply site ko even if im in FB. why is that? na virus ba ko?

[SamanthaJones]

im using google chrome. lately napansin ko bigla na lang nawawala ang browser so i have to start it again.

then sometimes. na reredirect sa multiply site ko even if im in FB. why is that? na virus ba ko?

 

When you say "nawawala" do you mean the google chrome window closes? It might be corrupted or infected with malware. If you get redirects it's possible that your browser may have been hijacked which is not necessarily caused by a virus. You computer might be infected with Spyware. Turn off system restore. Try running Malwarebytes.

Edited June 7, 2010 by SamanthaJones