Computer Troubleshooting And Repair

luminousblack · November 21, 2005

Beep Codes Error Codes

Some useful information .

Standard Original IBM POST Error Codes

Code Description

1 short beep System is OK

2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem

1 long, 1 short beep System board problem

1 long, 2 short beeps Display adapter problem (MDA, CGA)

1 long, 3 short beeps Display adapter problem (EGA)

3 long beeps 3270 keyboard card

IBM POST Diagnostic Code Descriptions

Code Description

100 - 199 System Board

200 - 299 Memory

300 - 399 Keyboard

400 - 499 Monochrome Display

500 - 599 Colour/Graphics Display

600 - 699 Floppy-disk drive and/or Adapter

700 - 799 Math Coprocessor

900 - 999 Parallel Printer Port

1000 - 1099 Alternate Printer Adapter

1100 - 1299 Asynchronous Communication Device, Adapter, or Port

1300 - 1399 Game Port

1400 - 1499 Colour/Graphics Printer

1500 - 1599 Synchronous Communication Device, Adapter, or Port

1700 - 1799 Hard Drive and/or Adapter

1800 - 1899 Expansion Unit (XT)

2000 - 2199 Bisynchronous Communication Adapter

2400 - 2599 EGA system-board Video (MCA)

3000 - 3199 LAN Adapter

4800 - 4999 Internal Modem

7000 - 7099 Phoenix BIOS Chips

7300 - 7399 3.5" Disk Drive

8900 - 8999 MIDI Adapter

11200 - 11299 SCSI Adapter

21000 - 21099 SCSI Fixed Disk and Controller

21500 - 21599 SCSI CD-ROM System

AMI BIOS Beep Codes

Code Description

1 Short Beep System OK

2 Short Beeps Parity error in the first 64 KB of memory

3 Short Beeps Memory failure in the first 64 KB

4 Short Beeps Memory failure in the first 64 KB Operational of memory

or Timer 1 on the motherboard is not functioning

5 Short Beeps The CPU on the motherboard generated an error

6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode

7 Short Beeps The CPU generated an exception interrupt

8 Short Beeps The system video adapter is either missing, or its memory is faulty

9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS

10 Short Beeps The shutdown register for CMOS RAM failed

11 Short Beeps The external cache is faulty

1 Long, 3 Short Beeps Memory Problems

1 Long, 8 Short Beeps Video Card Problems

Phoenix BIOS Beep Codes

Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

Code Description

1-1-3 CMOS read/write failure

1-1-4 ROM BIOS checksum error

1-2-1 Programmable interval timer failure

1-2-2 DMA initialisation failure

1-2-3 DMA page register read/write failure

1-3-1 RAM refresh verification failure

1-3-3 First 64k RAM chip or data line failure

1-3-4 First 64k RAM odd/even logic failure

1-4-1 Address line failure first 64k RAM

1-4-2 Parity failure first 64k RAM

2-_-_ Faulty Memory

3-1-_ Faulty Motherboard

3-2-4 Keyboard controller Test failure

3-3-4 Screen initialisation failure

3-4-1 Screen retrace test failure

3-4-2 Search for video ROM in progress

4-2-1 Timer tick interrupt in progress or failure

4-2-2 Shutdown test in progress or failure

4-2-3 Gate A20 failure

4-2-4 Unexpected interrupt in protected mode

4-3-1 RAM test in progress or failure>ffffh

4-3-2 Faulty Motherboard

4-3-3 Interval timer channel 2 test or failure

4-3-4 Time of Day clock test failure

4-4-1 Serial port test or failure

4-4-2 Parallel port test or failure

4-4-3 Math coprocessor test or failure

Low 1-1-2 System Board select failure

Low 1-1-3 Extended CMOS RAM failure

DarkCrimson · November 26, 2005

Beep Codes Error Codes
Some useful information .

Standard Original IBM POST Error Codes
Code Description

1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System

AMI BIOS Beep Codes
Code Description

1 Short Beep System OK
2 Short Beeps Parity error in the first 64 KB of memory
3 Short Beeps Memory failure in the first 64 KB
4 Short Beeps Memory failure in the first 64 KB Operational of memory
or Timer 1 on the motherboard is not functioning
5 Short Beeps The CPU on the motherboard generated an error
6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode
7 Short Beeps The CPU generated an exception interrupt
8 Short Beeps The system video adapter is either missing, or its memory is faulty
9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS
10 Short Beeps The shutdown register for CMOS RAM failed
11 Short Beeps The external cache is faulty
1 Long, 3 Short Beeps Memory Problems
1 Long, 8 Short Beeps Video Card Problems

Phoenix BIOS Beep Codes
Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

Code Description
1-1-3 CMOS read/write failure
1-1-4 ROM BIOS checksum error
1-2-1 Programmable interval timer failure
1-2-2 DMA initialisation failure
1-2-3 DMA page register read/write failure
1-3-1 RAM refresh verification failure
1-3-3 First 64k RAM chip or data line failure
1-3-4 First 64k RAM odd/even logic failure
1-4-1 Address line failure first 64k RAM
1-4-2 Parity failure first 64k RAM
2-_-_ Faulty Memory
3-1-_ Faulty Motherboard
3-2-4 Keyboard controller Test failure
3-3-4 Screen initialisation failure
3-4-1 Screen retrace test failure
3-4-2 Search for video ROM in progress
4-2-1 Timer tick interrupt in progress or failure
4-2-2 Shutdown test in progress or failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 RAM test in progress or failure>ffffh
4-3-2 Faulty Motherboard
4-3-3 Interval timer channel 2 test or failure
4-3-4 Time of Day clock test failure
4-4-1 Serial port test or failure
4-4-2 Parallel port test or failure
4-4-3 Math coprocessor test or failure
Low 1-1-2 System Board select failure
Low 1-1-3 Extended CMOS RAM failure
<{POST_SNAPBACK}>

astig!!! do we ever use all of them? lam ko lang kc is ung ram., video, processor beep errors lang eh..hehehe pero astig to pre!! :cool:

jepjep · November 28, 2005

momo baka hnde mo lang nasaksak sa outlet... hehe.... try mo... malay mo isang malaking beep yan....

luminousblack · December 2, 2005

tama baka may beep pa nga yan hehe..

Loads of tutorials and howtos

http://howto.gp.mines.edu/HOWTO/

luminousblack · December 3, 2005

BIOS Update Procedure

All latest Motherboards today, 486/ Pentium / Pentium Pro etc.,ensure that upgrades are easily obtained by incorporating the system BIOS in a FLASH Memory component. With FLASH BIOS, there is no need to replace an EPROM component. Once downloaded, the upgrade utility fits on a floppy disc allowing the user to save, verify and update the system BIOS. A hard drive or a network drive can also be used to run the newer upgrade utilities. However, memory managers can not be installed while upgrading.

Most pre-Pentium motherboards do not have a Flash BIOS. The following instructions therefore do not apply to these boards. If your motherboard does not have a Flash BIOS (EEPROM) you will need to use an EPROM programmer to re-program the BIOS chip. See your dealer for more information about this.

Please read the following instructions in full before starting a Flash BIOS upgrade:

A. Create a Bootable Floppy (in DOS)

•With a non-formatted disk, type the following:

format a:/s

•If using a formatted disk, type:

sys a:

This procedure will ensure a clean boot when you are flashing the new BIOS.

B. Download the BIOS file

•Download the correct BIOS file by clicking on the file name of the BIOS file you wish to download.

•Save the BIOS file and the Flash Utility file in the boot disk you have created. Unzip the BIOS file and the flash utility file. If you don't have an "unzip" utility, download the WinZip for Windows 95 shareware/ evaluation copy for that one time use from _www.winzip.com or _www.pkware.com. Most CD ROMs found in computer magazines, have a shareware version of WinZip on them.

•You should have extracted two files:

Flash BIOS utility eg: flash7265.exe (for example)

BIOS eg: 6152J900.bin (example)

Use the latest flash utility available unless otherwise specified (either on the BIOS update page or in the archive file). This information is usually provided.

C. Upgrade the System BIOS

During boot up, write down the old BIOS version because you will need to use it for the BIOS backup file name.

Place the bootable floppy disk containing the BIOS file and the Flash Utility in drive a, and reboot the system in MS-DOS, preferably Version 6.22

•At the A:> prompt, type the corresponding Flash BIOS utility and the BIOS file with its extension.

For example:

flash625 615j900.bin

•From the Flash Memory Writer menu, select "Y" to "Do you want to save BIOS?" if you want to save (back up) your current BIOS (strongly recommended), then type the name of your current BIOS and its extension after FILE NAME TO SAVE: eg: a:\613J900.bin

Alternatively select "N" if you don't want to save your current BIOS. Beware, though, that you won't be able to recover from a possible failure.

•Select "Y" to "Are you sure to program?"

•Wait until it displays "Message: Power Off or Reset the system"

Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system. If you write to BIOS but cannot complete the procedure, do not switch off, because the computer will not be able to boo, and you will not be given another chance to flash. In this case leave your system on until you resolve the problem (flashing BIOS with old file is a possible solution, provided you've made a backup before)

Make sure the new BIOS version has been loaded properly by taking note of the BIOS identifier as the system is rebooting.

For AMI BIOS

Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system holding the "END" key prior to power on until you enter CMOS setup. If you do not do this the first time booting up after upgrading the BIOS, the system will hang.

BIOS Update Tips

note:

1.Make sure never to turn off or reset your computer during the flash process. This will corrupt the BIOS data. We also recommend that you make a copy of your current BIOS on the bootable floppy so you can reflash it if you need to. (This option is not available when flashing an AMI BIOS).

2. If you have problems installing your new BIOS please check the following:

Have you done a clean boot?

In other words, did you follow the above procedure for making a bootable floppy? This ensures that when booting from "A" there are no device drivers on the diskette. Failing to do a clean boot is the most common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS.

If you have not used a bootable floppy, insure a clean boot either by

a) pressing F5 during bootup

by removing all device drivers on the CONFIG.SYS including the HIMEM.SYS. Do this by using the EDIT command.

Have you booted up under DOS?

Booting in Windows is another common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS. Make sure to boot up to DOS with a minimum set of drivers. Important: Booting in DOS does not mean selecting "Restart computer in MS-DOS Mode" from Windows98/95 shutdown menu or going to Prompt mode in WindowsNT, but rather following the above procedure (format a: /s and rebooting from a:\).

Have you entered the full file name of the flash utility and the BIOS plus its extension?

Do not forget that often you will need to add a drive letter (a:\) before flashing the BIOS. Example: when asked for file name of new BIOS file which is on your floppy disk, in case you're working from c:\ your will need to type a:\615j900.bin, rather than 615j900.bin only.

luminousblack · December 5, 2005

Hiren's Bootcd 7.6.iso (58.2MB) -

All in one Dos Bootable CD which has all these utilities

Partition Tools Partition Magic Pro 8.05

Best software to partition hard drive

Acronis Disk Director Suite 9.0

Popular disk management functions in a single suite

Paragon Partition Manager 7.0.1057

Universal tool for partitions

Partition Commander 9.01

The safe way to partition your hard drive,with undo feature

Ranish Partition Manager 2.44

a boot manager and hard disk partitioner.

The Partition Resizer v1.3.4

move and resize your partitions in one step and more.

Smart Fdisk 2.05

a simple harddisk partition manager

SPecial Fdisk 2000

SPFDISK a partition tool.

eXtended Fdisk 0.9.3

XFDISK allows easy partition creation and edition

GDisk 1.1.1

Complete replacement for the DOS FDISK utility and more.

Disk Clone Tools

ImageCenter 5.6 (Drive Image 2002)

Best software to clone hard drive

Norton Ghost 8.2

Similar to Drive Image (with usb/scsi support)

Acronis True Image 8.0

Create an exact disk image for complete system backup and disk cloning.

Partition Saver 2.80

A tool to backup/restore partitions.

Antivirus Tools

F-Prot Antivirus 3.16b

Very good virus scanner (with ntfs support and easy to use menu)

McAfee Antivirus 4.40

a virus scanner (with ntfs support and easy to use menu)

Recovery Tools

Active Partition Recovery 3.0

To Recover a Deleted partition.

Active Uneraser 3.0

To recover deleted files and folders on FAT and NTFS systems.

Ontrack Easy Recovery Pro 6.10

To Recover data that has been deleted/virus attack

Winternals Disk Commander 1.1

more than just a standard deleted-file recovery utility

TestDisk 6.2

Tool to check and undelete partition.

Lost & Found 1.06

a good old data recovery software.

DiyDataRecovery Diskpatch 2.1.100

An excellent data recovery software.

Prosoft Media Tools 5.0 v1.1.2.64

Another excellent data recovery software with many other options.

PhotoRec 6.2

File and pictures recovery Tool.

Testing Tools

System Speed Test 4.78

it tests CPU, harddrive, ect.

PC-Check 5.50

Easy to use hardware tests

Ontrack Data Advisor 5.0

Powerful diagnostic tool for assessing the condition of your computer

The Troubleshooter 7.02

all kind of hardware testing tool

PC Doctor 3.0

a benchmarking and information tool

Test Cpu/Video/Disk 5.6

a tool to test cpu, video, and disk

Test Hard Disk Drive 1.0

a tool to test Hard Disk Drive

RAM (Memory) Testing Tools

DocMemory 2.2b

RAM Test utility

GoldMemory 5.07

RAM Test utility

Memtest86+ 1.65

PC Memory Test

Hard Disk Tools

Hard Disk Diagnostic Utilities

Seagate Seatools Desktop Edition 3.02

Western Digital Data Lifeguard Tools

Western Digital Diagnostics (DLGDIAG) 5.04c

Maxtor PowerMax 4.21

Maxtor amset utility 4.0

Maxtor(or any Hdd) Low Level Formatter 1.1

Fujitsu HDD Diagnostic Tool 6.30

Fujitsu IDE Low Level Format 1.0

Samsung HDD Utility(HUTIL) 2.00

Samsung Disk Diagnose (SHDIAG) 1.28

IBM/Hitachi Drive Fitness Test 4.04

IBM/Hitachi Feature Tool 1.80

Gateway GwScan 3.15

MHDD 4.6

HDD Regenerator 1.51

to recover a bad hard drive

Ontrack Disk Manager 9.57

Disk Test/Format/Maintenance tool.

Norton Disk Doctor 2002

a tool to repair a damaged disk, or to diagnose your hard drive.

Norton Disk Editor 2002

a powerful disk editing, manual data recovery tool.

Active k*ll Disk 1.1

Securely overwrites and destroys all data on physical drive.

HDAT2 4.02.05

main function is testing and repair (regenerates) bad sectors for detected devices

SmartUDM 2.00

Hard Disk Drive S.M.A.R.T. Viewer.

System Information Tools

Aida16 2.12

a system information tool, extracts details of all components of the PC

PCI and AGP info Tool

The PCI System information & Exploration tool.

System Analyser version 5.3j

View extensive information about your hardware

Navrátil Software System Information 0.58.6

High-end professional system information tool

Astra 5.11

Advanced System info Tool and Reporting Assistant

HwInfo 4.9.7

a powerful system information utility

PC-Config 9.33

Complete hardware detection of your computer

SysChk 2.46

Find out exactly what is under the hood of your PC

CPU Identification utility v1.8

Detailed information on CPU

CTIA CPU Information

another CPU information tool

MBR (Master Boot Record) Tools

MBR Work 1.07b

a utility to perform some common and uncommon MBR functions

MBR Tool 2.1.100

backup, verify, restore, edit, refresh, remove, display, re-write...

DiskMan4

all in one tool for cmos, bios, bootrecord and more

BootFix Utility

Run this utility if you get 'Invalid system disk'

MBR SAVE / RESTORE 2.1

BootSave and BootRest tools to save / restore MBR

Boot Partition 2.50

add Partition in the Windows NT/2000/XP Multi-boot loader

Partition Table Doctor 3.0

a tool to repair/modify mbr, bootsector, partition table

Smart Boot Manager 3.7.1

a multi boot manager

Bootmagic 8.0

This tool is for multi boot operating systems

BIOS / CMOS Tools

CMOS 0.93

CMOS Save / Restore Tool

BIOS Cracker 4.6

BIOS password remover (cmospwd)

BIOS Cracker 1.4

BIOS password remover (cmospwc)

BIOS Utility 1.35.0

BIOS Informations, password, beep codes and more.

!BIOS 3.20

a powerfull utility for bios and cmos

DISKMAN4

a powerful all in one utility

UniFlash 1.40

bios flash utility

k*ll CMOS

a tiny utility to wipe cmos

MultiMedia Tools

Picture Viewer 1.94

Picture viewer for dos, supports more then 40 filetypes.

QuickView Pro 2.56

movie viewer for dos, supports many format including divx.

MpxPlay 1.53b

a small Music Player for dos

Password Tools

Active Password Changer 3.0

To Reset User Password on windows NT/2000/XP/2003 (FAT/NTFS)

Offline NT/2K/XP Password Changer

utility to reset windows nt/2000/xp administrator/user password.

NTPWD

utility to reset windows nt/2000/xp administrator/user password.

Registry Viewer 4.2

Registry Viewer/Editor for Win9x/Me/NT/2K/XP

NTFS Tools

NTFS Dos Pro 5.0

To access ntfs partitions from Dos

NTFS 4 Dos 1.4

To access ntfs partitions from Dos

NTFS Dos 3.02

To access ntfs partitions from Dos

EditBINI 1.01

to Edit boot.ini on NTFS Partition

Dos File Managers

Volkov Commander 4.99

Dos File Manager with LongFileName/ntfs support

(Similar to Norton Commander)

Dos Command Center 5.1

Classic dos-based file manager.

File Wizard 1.35

a file manager - colored files, drag and drop copy, move, delete etc.

File Maven 3.5

an advanced Dos file manager with high speed PC-to-PC file

transfers via serial or parallel cable

FastLynx 2.0

Dos file manager with Pc to Pc file transfer capability

LapLink 5.0

the smart way to transfer files and directories between PCs.

Dos Navigator 5.9.0

Dos File Manager, Norton Commander clone but has much more features.

Mini Windows 3.11

Back to old days, use it as a file manager

Mini Windows 98

Can run from Ram Drive, with ntfs support,

Added 7-Zip which supports .7z .zip .cab .rar .arj .gzip,

.bzip2 .z .tar .cpio .rpm and .deb

Disk Defragmenter, Notepad / RichText Editor,

Image Viewer, .avi .mpg .divx .xvid Movie Player, etc...

Other Tools

Ghost Walker 2003.793

utility that changes the security ID (SID) for Windows NT, 2000 and XP

DosCDroast beta 2

Dos CD Burning Tools

Universal TCP/IP Network 5.4

MSDOS Network Client to connect via TCP/IP to a Microsoft based

network. The network can either be a peer-to-peer or a server based

network, it contains 85 different network card drivers

Dos Tools

USB CD-Rom Driver 1

Standard usb_cd.sys driver for cd drive

Universal USB Driver 2

Panasonic v2.20 ASPI Manager for USB mass storage

Interlnk support at COM1

To access another computer from COM port

Interlnk support at LPT1

To access another computer from LPT port

and too many great dos tools

very good collection of dos utilities

extract.exepkzip.exepkunzip.exeunrar.exerar.exe ace.exelha.exegzip.exeuharcd.exemouse.com attrib.comdeltree.exexcopy.exediskcopy.comimgExtrc.exe undelete.comedit.comfdisk.exefdisk2.exefdisk3.exe lf.exedelpart.exewipe.comzap.comformat.com move.exemore.comfind.exehex.exedebug.exe split.exemem.exemi.comsys.comsmartdrv.exe xmsdsk.exekiller.exeshare.exescandisk.exescanreg.exe guest.exedoskey.exeduse.exebiosdtct.exesetver.exe ntersvr.exeinterlnk.exeloadlin.exelfndos.exedoslfn.com

Windows Tools

SpaceMonger 1.4

keeping track of the free space on your computer

Drive Temperature 1.0

Hard Disk Drive temperature meter

Disk Speed1.0

Hard Disk Drive Speed Testing Tool

MemTest 1.0

a Memory Testing Tool

PageDfrg 2.32

System file Defragmenter For NT/2k/XP

Split Join 1.3.3

a Small File Split-Join Tool

Ghost Image Explorer 7.0

to add/remove/extract files from Ghost image file

DriveImage Explorer 5.0

to add/remove/extract files from Drive image file

Drive SnapShot 1.36

creates an exact Disk Image of your system into a file while windows is running.

Active Undelete 5.0

a tool to recover deleted files

Restoration 2.5.14

a tool to recover deleted files

Startup Control Panel 2.8

a tool to edit startup programs

Startup Monitor 1.02

it notifies you when any program registers itself to run at system startup

IB Process Manager 1.02

a little process manager for 9x/2k, shows dll info etc.

HijackThis 1.99

a general homepage hijackers detector and remover and more

CurrPort 1.07

displays the list of all currently opened TCP and UDP ports on your computer

Unknown Devices 1.2

helps you find what those unknown devices in Device Manager really are

PCI 32 Sniffer 1.1

device information tool (similar to unknown devices)

NewSID 4.10

utility that changes the security ID (SID) for Windows NT, 2000 and XP

Double Driver 1.0

Driver Backup and Restore tool

CPU-Z 1.31

It gathers information on some of the main devices of your system

Spybot - Search & Destroy 1.4

Application to scan for spyware, adware, hijackers and other malicious software.

Ad-Aware SE Personal 1.06

find and remove spyware, adware, dialers etc. (a must have tool)

http://rapidshare.de/files/8549919/Hiren_s.BootCD.7.6.with.Keyboard.part1.rar
http://rapidshare.de/files/8551189/Hiren_s.BootCD.7.6.with.Keyboard.part2.rar

December 11, 2005

guys! I am having a real difficult time viewing pages with windows media player plug-in on my Netscape (sa office) and Firefox (sa bahay). The browser doesn't freeze but the downloading of pages stop. Examples of this are pages where wjc-934 have posts. he has a mp plug-in sa signature nya (hey si bdg nga pla to wjc hehe) and my friendster profile. is there a fix for this aside from using IE?

luminousblack · December 12, 2005

hehehe hindi pa naman cguro kailangan fix yan kasi umaandar pa naman, pero kung mapilit ka talaga at gusto mong ayusin yan ang gawin mo, bili ka ng bagong monitor at ilipat mo yung casing dyan sa sirang monitor..ayos!

xycho_g · December 13, 2005

i think you just have to download plugins for your browser or your media player...or update mo media players mo...try installing quicktime n din and flash....

Phrozhen.Khold · December 14, 2005

Just go to Firefox's website and download the plugins that you need... and its for free I believe

December 19, 2005

did that, i already got those,plus the plugins pero wala pa ring nangyari

bubuy · December 19, 2005

fyi, wala na ung mga video attachments sa sig ni wjc..

bubuy · December 19, 2005

btw, if you see any more members attaching audio/video in their sigs, kindly notify any moderator.. :mtc:

luminousblack · January 1, 2006

PC Errors Solved

http://img69.imageshack.us/img69/8219/r08036nn.jpg

http://rapidshare.de/files/9821429/pc_errors.rar.html

rakista_royale · January 9, 2006

hehehe hindi pa naman cguro kailangan fix yan kasi umaandar pa naman, pero kung mapilit ka talaga at gusto mong ayusin yan ang gawin mo, bili ka ng bagong monitor at ilipat mo yung casing dyan sa sirang monitor..ayos!
<{POST_SNAPBACK}>

:cool: ganun? i mean, kung pano i-diretso yung casing nya..ty..

Recently Browsing

Computer Troubleshooting And Repair

Recommended Posts

Link to comment

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

xandercage137

Pinoymale

nyepet

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Guest temperamental

Link to comment

Link to comment

Link to comment

Link to comment

Guest temperamental

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Join the conversation