dominoneedsu

ford ranger for long runs,

grand vitara for off road travel,

revo for big group travel

old trusted owner jeep for fun

marami na din. 300 plus na

sometimes. ksi ung mga taken na nag experiement din. Parang food, kahit letson palagi, nkakaumay na..marasap din ang kinilaw minsan.

mahirap lalo na pag iisang dept lang kau. paano pag break na kau tapos magkasama kau sa isang project. Akward masyado. kaya patingin tingin lang dpat.

lahat ng eurotel me short time. it has 2 types of rooms. the front part is for longer stay. the ones in the back which has a

gate near the cashier is for the short time.

VC rates (no Black Card):

Highest i tried: 1800

lowest i tried : 850

If you have the BC VIP card you will get 10% discount. I noticed with VC if you have a car, they will always give you the expensive rooms before the cheaper ones. Even if you use the hand signals, you will still end up on the high end rooms, wala raw vacant. For drive inn hotel its the best. Shelling a few thousand pesos is worth if your partner is a head turner. The girl also appreciate if you bring her to this place. Nice bed, jacuzzi, loaded ref..good lighting etc.. its money spent well. Saka branded motels are sure to be CAM free...

ok its been a long time since i posted in MTC..topics. Billing:

MERALCO or Any electric cooperative.

1) residential: you pay for the actual power consumption (resistive onl),in kw-hour, meaning you consumed 1000watts in hour hour x the rate (see your meralco bill for the bill details>

2) For commercial users: you will pay for the following:

> Actual power consumed.

> Demand and demand penalties (meaning your contract is 1.5MVA and your actual load at a given time was 1.7MVA, then penalties is imposed.

> Power factor: 0.8 power factor is already penalized.

0.85 status quo, meaning no penalty and no bunos.

0.9 t0 0.95 Pf bunos is awarded, following a standard computation procedure usually stipulated in the contract.

Other topics. single phase and 3 phase power.

> For small power and lighting needs. single phase power is supplied. Its composed of two wires + G,

phase to phas3 220V for MERALCO and phase to neutral for COOPs.

> For large loads, specially those involving motors, 3 phase power is utilized. It's composed of 3 wires plus G.

Advantage of 3 phase vs single phase? 3 phase uses a smaller cable, why? check in google

sample: load is 1000VA..

calculating for Load current in single phase.

P=VI

I=P/V

= 1000/220=4.5Amps

For 3 phase:

P=square root of 2 x VI

I-P/1.73 x 220= 2.6Amps

3 phase system has a lower load current, so u can use smaller cables, yon nga lang maging 3 sila.

depende na un sa econimic study ng project.

I hope this helps.

Among other limitations, text messages (electronic evidence) cannot be used in criminal cases.

thank you sir..the girl is telling me that she will file charges of slander yata over my text messages.

my son is a lawyer..i just cant tell him about it...thank you

Sir,

I would like to ask if text messages can be used as evidence in court?

thank you po...

i observed that instead of contributing

exciting and good ideas on this forum,

in south china sea/west philippine sea. Some of us

Filipinos, tend to fight, insult each other. Eh

kung sa forum pa lang d tau maging isa against a common

and superior enemy...paano tau lalaban? one good senator

wrote in a forum..na kaya wala respeto sa atin ang china,

dahil masyado tayong fractured and divided as a nation.

eh, bill about implementing family planning to restrict

our high birth rate,d natin kaya ipasa, how much more

a common voice to defeat china?

each of us has it's own idea..lets respect it.

good english or hinde...good idea or hinde...give him/her

a chance to express himself..

mga bro pls help urgent lang.

I have a date this coming sat 9am-1pm lang ang time slot..now i would like to know where is the good motel in pansol calamba, where i can take this girl.

I know that there are places there that is like a rented resort..but thats too big for me...what im looking for is a VC type motel..TY in advance

Esentialls: valid drivers license, copy of car registration(valid),

Basic tools and spares: working spare tire, tools, jack, flashlight, jumper cable (lalo na if luma na battery mo).

others: pera(minimum 2k), condom, lotion, rubbing alcohol, perfume and air freshner, insect spray(if you wish to camp outside), small empty bottle (pag nsa traffic ka pang emergency leak

2003 nissan sentra...2002 toyota revo..

i tint my car for the following reasons:

> privacy..kahit ano gawin ay d kita

> Security..kund d sigurado kung ano ang laman...bad guys will think twice d ba>

> health..3M tints blocks ultraviolet rays and it blocks the sunlight too, giving easy time to my AC unit

> mystery look...d nila alam sino naka sakay..

downside: mahirap magdrive sa gabi lalo na kung asphalt ang pavement at wala lines ung daan...

try ninyo magpupongko beach sa Pilar (siargao insland) surigao del norte... punta ako dun next month..post ko pics..

i was born on January 6..used to be 3 kings day..kaya libre ako sa handa...but now na...

im proud to be born in this zodiac sign..Why kaya the zodiac sign description fits 95% of what we really are? hmmm

help there was a thread i read somewhere about a pen camera with you-tube clarity.. can you pls give me the path? thanks

I bought a NEO laptop last august.. Its a duo core, etc...i wont elaborate in the technical specs because its perfectly working except for one thing. The cooling fan is noisy that when i use the microphone the other party complains about the irritating humming sound that they can hear. Now my question is, what will i do to remove the noise coming from the Fan? can it be replaced with a quiter fan?

Next item: When the jacks for the microphone and speakers is connected, isnt it that the built in microphone and the local speakers is supposed to be cut-off? My unit seems not able to function like this, thus the noise from the fan is catched by the built in microphone. If plugging the jacks cut-off the built-in microphone, this will solve my problem because the headset unit is far from my laptop and wont get the humming sound from the cooling fan..

advice please

To whoever is expert on these,

I bought a NEO laptop last august.. Its a duo core, etc...i wont elaborate in the technical specs because its perfectly working except for one thing. The cooling fan is noisy that when i use the microphone the other party complains about the irritating humming sound that they can hear. Now my question is, what will i do to remove the noise coming from the Fan? can it be replaced with a quiter fan?

Next item: When the jacks for the microphone and speakers is connected, isnt it that the built in microphone and the local speakers is supposed to be cut-off? My unit seems not able to function like this, thus the noise from the fan is catched by the built in microphone. If plugging the jacks cut-off the built-in microphone, this will solve my problem because the headset unit is far from my laptop and wont get the humming sound from the cooling fan..

advice please

hindi ko sir sigurado ung sa NPC but with EPIRA today, it would be better to contact a licensed RES (retail energy supplier) in your area. the function of the RES is to market, sell, agregate electric power. Licensed RES suppliers, to date, are:

 

TeaM (Philippines) Energy Corp. (TPEC)

Trans-Asia Oil and Energy Development Corp.,

First Cabanatuan Ventures Corp.,

Aboitiz Energy Solutions Inc.,

First Gen Energy Solutions Inc.,

Angeles Power Inc.,

iN2Power Inc.

GNPower Ltd. Co.

 

good luck, sir.

Salamat din sa info..i will tell them about these

OY CAll ako barbecue lang pala eh. heheheheh. Pm me naman dude.. I have lots of questions. pm mo na din ang yahoo messenger mo.

 

Dude how come yung isang electrical engineer na factory manager nang isang big garments factory installed one of those ESD but one that he designed and built himself he told me the parts lang inabot na nang 100 thou plus basically big capacitor lang daw.within a few months bawi na. thanks pare.

Sorry that i havent read this section for a while..i went to venezuela and texas kasi...if you still need some advice heres my email and YM crl_007@yahoo.com

With Sir Dominoneedsu's permission, I would like to reply to Sir Biromn.

 

Sir, that's because Meralco charges three-phase customers differently from single phase (mostly residential) clients.

 

Those that use single phase meters are charged based on their Kwhr consumption only. But it becomes more complicated for three phase customers. Three phase meters monitor kwhr consumption differently, and Meralco has a more complicated method for computing the total bill.

 

To put it simply, Meralco does not monitor reactive power for single phase customers. The capacitor bank ESD works to correct the reactive power consumption, which 3-phase customers pay for. Installing one on a sigle phase system here in the Philippines will not have a significant effect on the total bill that's to be paid for.

 

So why are they advertising it on TV? Please observe that the advertisements came from Taiwan. They probably charge single phase customers in Taiwan for reactive power consumption, so it works for them there. But in the RP, it will not have the same effect.

 

Hope this helps.

Correct and well explained. Sir Biromn and tawag dun ay power factor correction. Its a ENERCON and system improvement installation. You need to evaluate the present power factor, calcute the size of the capacitor bank required to adjust your power factor to a level that you will get rid of the penalties for low PF and get a bonus for high PF. Devide the total amount of the installation by the savings and you will get the total payback period of the project.

I am making this very late post to thank you all for your inputs on what to do with the electricals during my home rebuild. Your insight proved to be very helpful and while it drove my architect and master electrician crazy, I am very happy with the result and aboslutely do not feel that I have been made to overspend by my contractor. He thinks I did this on my own. Overkill daw. Para daw nag wiring sila ng data center. Eh ano pa nga ba…

 

Just to let you guys know how it turned out:

 

You were right, Avesco still sells ABB circuit breakers so I went ABB all the way. I have a 100 amp ABB Tmax breaker for the mains and ABB S2 miniature circuit breakers under that as well as ABB F200 residual current circuit breakers for the kitchen, den, and my computer room.

 

Everything is on 3-wire stranded with Clipsal fixtures. The breakers are installed in the kitchen housed in an ABB molded breaker box with the DIN rails in full view. I do not like hidden breaker boxes because I want to see their status at a glance. We then connected an ABB ATS010 automatic transfer switch to this which handles starting, stopping and switching of the 25KVA Denyo genset outside.

 

I have a 3 meter, 10 mm diameter copper bar buried under the house to serve as the main grounding bar. We decided to go with rigid metal electric conduits with liquid resistant fittings. For the 110vac supply, I have a 10kva unregulated stepdown in the kitchen and a 5kva Comfac data grade AVR for the den and the computers. The Comfac supplys a different circuit of COs all around the house for computers and lcd TV only.

 

This installation forced me to scrimp on the other parts of the house but I am happy with the outcome. At least sigurado ako na kung masusunog bahay ko hindi manggagaling sa wiring. If you guys did not confirm my plans, I would have listened to my contractor and would still be wondering if my wiring was just "pwede na" instead of being to specifications.

 

Thanks again guys.

No problem. im glad that my comments have helped you decide on what to specify for your house. It was also a good choice that you use metal conduits vs PVC ,because metal conduits is good specially in ceiling installations. im almost finishing the oil refinery design for venezuela and will be coming back in our alabang office by sept..PM me if you need further assistance.

Unbundling is simply the identification of the individual charges, whether generation charges or

transmission charges or government charges. Unbundling was initiated in May 30, 2003 as prescribed by the Energy Regulatory Commission (ERC), and was implemented immediately, beginning with June 2003 billing cycle.

 

to better understand your bill (from meralco, that is):

 

Generation charge - its the price of power from napocor and other IPPs where meralco source their power needs

 

transmission charge - wheeling charges from transco

 

system loss charge - price of power lost from technical (transformer losses, line losses, etc)

and non technical (pilferage, etc). meralco can only charge a max of 9.5% for this. this is the total power delivered to meralco from napocor and IPPs minus actual power delivered by meralco to their customers.

 

distribution charge - this is meralco's rates

 

lifeline subsidies - lower rates for those consuming less than 100 kWHrs per month

 

govt taxes - includes EVAT and franchise tax. some cities (like pasig) dont charge the franchise tax.

 

universal charges - flat charges to all customers of the electric utility

 

missionary - to help finance electric power to 'poor regions' in the country, set by the ERC

environmental - helps finance the environmental projects of napocor like watersheds, etc.

Bro Robbietan, where ka ba connected na company? you have an accurate way of explaining the technicalities.

In the 80's theres a pamphlet which we can get from NPC entitled "RULE ON THE SALE OF ENERGY" . Is this still available in NPC? we are constructing an ethanol plant in Bukidnon and Isabela. My copy when i used to work in the mining sector is old.. the group that is in charge for the design and construction is asking for my assistance in the contract negotiation with the rural cooperative which we planned to sell the excess power.. The problem is, im the only one who has a background on this and im in japan right now..thats why im asking if you have an idea of any technical paper of NPC similar to the above which we can use as basis for the technical negotiantions..thx

the thread starter is angry with toyota..well, we cant blame him. We did'nt went thru the situations that he experienced. Here are my opinion on this case.

A car is not perfect, it is designed and made by man. When you buy a car, it is expected that in a certain period, you will be required to do some minor and major repair depending on the KMs it travelled, the road conditions and mostly the driving style of the one using it. There are also rare cases wherein new cars will breakdown prematurely due to unseen manufacturing deffects. Remember guys, the breakdown of cars is not BRAND DEPENDENT. All of them have inherent advantage and disadvantage, thats why each one of us buys a different model or brand because we have our own way of choosing.

It is unfair to label Toyota Cars as bad. As if we were saying that the Millions of people using toyota cars are wrong?! Maybe, just maybe the batch that was bought have manufacturing deffect, but a company will not put a BRANDED product that has design deffect. I do not believe that the oil pump of a 1.6 toyota engine is undersized for the unit. Cmon, the amount of oil circulating the lubrication system is design with a safety factor of 2. This is because the designer takes into consideration the clugging of the system from the pump down to the filters.

If your car suffers this deffect, what about the 199,000 thousand more that bought the same model on the same year? i think there's only 3 of you that has complained online about this. Mind you guys, i dont work ON TOYOTA. My cars are not toyota, except my first owner type jeep that was assembled out of every available junk on the market. I am just presenting here a different opinion. I always tell my friends about buying a car.

"If you dont have a problem and likes to have one...then buy a car"

"Your life depends on the car you are driving, so treat your car nicely, listen to its sounds and be gentle with her, change the oil at manufacturers adviced intervals, change filters, brake pad, etc. and keep a record of what you did to your car" this will improve the second hand value of your car if the maintenance record is available."

"The acquisition cost is only 1/3 of your expense. The other 1/3 is the maintenance and the last 1/3 is the operating expenses"

"If the maintenance is becoming a head ache..SELL IT!

To be worry free (almost) change car every 3-5 yrs..below 100T Km..like the japanese. Actually this last one is the best solution to your problem..PEACE bro.